3M X90 说明手册

31

Controlling the Projector via Scheduling

Schedule Settings

Schedule settings can be configured from a web browser.

(16)

There are three types of scheduling.

 1) Daily: Perform the specified operation at a specified time every day.

 2)  Sunday ~ Saturday: Perform the specified operation at the specified time on a 

specified day of the week.

 3) Specific Date: Perform the specified operation on the specified date and time.

• In Standby mode the power indicator will flash green for approx. 3 

seconds when at least 1 “Power ON” schedule is saved.

• When the schedule function is used, the power cord must be connected to 

the projector and the outlet and the power switch must be turned on, [ | ]. The 

schedule function does not work when the power switch is turned off, [¡] or 

the breaker in a room is tripped. The power indicator will lights orange or green 

when the projector gets is receiving the power.

NOTE

 ) Enter 

[https://192.168.1.10] into the address bar of the web browser.

 ) Enter the Administrator ID and Password and click 

[Logon].

 3)  Click 

[Schedule Settings] on the main menu and select the required schedule 

item.

 4) Click the 

[Enable] check box to enable scheduling.

 5) Enter the Date (Month/Day) for specific date scheduling.

 6)  Click 

[Add] and set the hour, command and parameters and click [Add This 

Schedule] when you want to add a command.

 ) Click the 

[Delete] button when you want to delete a schedule.

 ) Click the 

[Apply] button to save the settings.