3M X90 说明手册
33
e-SHOT(Still Image Transfer) Display
e-SHOT (Still Image Transfer) Settings (Continued)
When the authentication setting is enabled, the following settings are required.
6) Click
When the authentication setting is enabled, the following settings are required.
6) Click
[Security Settings] on the main menu.
) Select
[Network Control] and enter the desired authentication password. *
see Note
) Click the
[Apply] button to save the settings. * see Note
• The Authentication Password will be the same for
[Network Control
Port1 (Port: 23)], [Network Control Port2 (Port: 9715)], and [Image Transfer
Port (Port: 9716)].
NOTE1
• The new configuration settings are activated after restarting the
network. Restart the network connection when any configuration settings are
changed. The network connection can be restarted using
[Network Restart] on
the main menu.
NOTE2
e-SHOT (Still Image Transfer) Transmission
e-SHOT transmission requires an exclusive application for your PC. Please visit
www.3m.com/meetings to obtain the application and software update. Refer to the
manual for the application for instructions.
3M™ Digital Projector X90
© 3M 2007. All Rights Reserved.