Arcam fmj p35 用户手册
10
11
E
n
g
li
sh
Installation: P35 power amplifier
CONNECTING TO OTHER EQUIPMENT
Follow the installation instructions for the integrated amplifier on
pages 5–6.
pages 5–6.
AUDIO IN
– Connect this input to the output sockets of your pre-
amplifier or the
PRE OUT
sockets of an integrated amplifier.
MONO LINK
– The power amplifier can be adapted to provide
two mono loudspeaker outputs from a single input. Pull out the
link supplied and use it to connect the
link supplied and use it to connect the
L
and
R AUDIO OUT
sockets
together. Using one power amplifier per loudspeaker will enable you
to bi-amplify bi-wireable loudspeakers.
to bi-amplify bi-wireable loudspeakers.
This is particularly beneficial for top quality stereo installations with a
separate pre-amplifier, or where amplifiers are provided for the left,
centre and right channel loudspeakers in a five speaker Dolby Pro
Logic or Dolby Digital system.
separate pre-amplifier, or where amplifiers are provided for the left,
centre and right channel loudspeakers in a five speaker Dolby Pro
Logic or Dolby Digital system.
Contact your Arcam dealer for more information.
‘Daisy chaining’ – The power amplifier can be connected to further
power amplifiers to drive more speakers (e.g. those in other rooms or
tri-amplified speakers, etc).
power amplifiers to drive more speakers (e.g. those in other rooms or
tri-amplified speakers, etc).
Connect the extra power amplifier inputs to the
AUDIO OUT
sockets
on the power amplifier, left to left, right to right.
+
R/CH1
–
CTR/CH3
SP1
SP2
POWER INLET
OUT
IN
L
R
VOLTAGE
SELECT
230V
4 – 16 OHMS
+
L/CH2
–
+
R/CH1
–
+
L/CH2
–
AUDIO
SP1
SP2
4 – 16 OHMS
+
CTR/CH3
–
+
CTR/CH3
–
AUDIO
IN
OUT
LINK
REMOTE
IN
TRIG
OUT
Optional Third Channel Module
– provides a third 90W channel
suitable for Home Cinema or
multi-channel audio use.
– provides a third 90W channel
suitable for Home Cinema or
multi-channel audio use.
REMOTE SWITCHING
By making a connection from the
REMOTE IN
socket of the P35 power
amplifier to the
TRIG OUT
socket of the A32 integrated amplifier, you
can use the A32 to switch the power amplifier on and off. If configured
in this way, the front panel
in this way, the front panel
POWER
button of the A32 (or the
POWER/
STANDBY
button on the remote control) switches both amplifiers on
and off together. This facility allows you to conceal the power amplifier
yet still control it.
yet still control it.
The connecting cable required is a 3.5mm to 3.5mm jack lead (stereo
or mono) and it is possible to connect several power amplifiers to an
A32 by ‘daisy chaining’ from
or mono) and it is possible to connect several power amplifiers to an
A32 by ‘daisy chaining’ from
TRIG OUT
of one P35 into the
REMOTE IN
of the next.
THREE CHANNEL OPTION
The power amplifier can be upgraded from stereo to three channels
by adding a Third Channel Module: in this case, the model is designated
P35/3.
by adding a Third Channel Module: in this case, the model is designated
P35/3.
The module offers extra loudspeaker terminals together with a third
set of
set of
AUDIO IN
and
OUT
phono sockets and converts the P35 into
a 3 x 90W (RMS per channel into 8Ω) amplifier suitable for Home
Cinema or multi-channel audio use.
Cinema or multi-channel audio use.
Contact your Arcam dealer for further details.