Alinco dj-v17t 用户手册

4.Basic Operation

1. Turn on the unit.

2. Press the 

key and rotate the dial to adjust the audio level as necessary.

3. Press the 

key and rotate the dial to adjust the squelch level.

4. Select the frequency that you wish to operate by using the dial or the keypad.

When a signal is received on the frequency that you selected, 

and S-meter

are displayed on the LCD, then the received signal can be heard.  The green RX

indicator also lights at this time.

In case the receiving signal is weak and the audio is intermittently cut off by the

squelch, press the MONI key.  As long as this key is pressed, the squelch including

TSQ/DCS unmutes making the audio easier to hear.

• The squelch is unmuted while the MONI key is pressed, regardless of the squelch

level setting.

• This function unmutes the squelch even if the DCS and Tone Squelch functions are

set.

4.7

• The dial and direct key-entry of frequency/memory channel are blocked in the

Call mode.

• It is possible to temporary change the offset and CTCSS/DCS related

parameters in the Call mode.

• The Scan function is deactivated in the Call mode.
• The CALL channel reprogramming is possible but it can't be deleted from the

memory channel mode.