Alinco dj-v17t 用户手册

8.Set Mode

It often happens that the radios fail to receive the very beginning instant of each

communication due to squelch/TSQ/DCS etc.  By setting the burst time of the first

digit longer, the risk to miss the first DTMF tone will decrease.

1. DB-60 is displayed on the LCD.

2. Rotate the dial to select the initial-character burst time.

The Ni-MH battery pack can be charged with an external power supply or an optional

AC adapter using the DC-jack on the unit.  Please select ON to activate this function.

The factory setting is OFF.

1. CHG-OF is displayed on the LCD.

2. Rotate the dial to select the battery charge setting on and off.

3. Please be sure to read "Battery Type Setting " (page 49) to correctly use this function.

• Please be sure to select OFF when using a dry cell case otherwise it may risk a

leak of battery liquid, heat or explosion of the battery cells and the battery
case.

• While this function is activated, without attaching a battery pack or the

remaining battery level is below the usable range, the unit turns on by just
connecting the DC source such as an adapter or a DC cable (without operating
the power key).

CHG-OF

CHG-ON

PTT ON

DTMF code

DTMF code

DTMF code

WAIT Time

First Digit

Burst Time

Pause

Time

Burst

Time

Pause

Time

Burst

Time

DB-60

DB-80

DB-160

DB-200

(unit: ms)