Alinco dj-v17t 用户手册

9.Cloning and Packet Operation

The memory data and customized operational parameters can be transferred from a

Master unit to other DJ-V17 (Slave units).

• Make sure that both units are turned off before connecting the cable.

• Connect the Microphone/Speaker jack on the Master unit with the Slave unit using

an optional clone cable (EDS-11) as shown below, then turn on both units.

Press the PTT key three times while holding down

the MONI key.

"CLONE" is displayed on the LCD, and both units

enter the Clone mode.

To the MIC/SP jack on the Master unit

* Be sure to securely screw the plug all the way down to the jack

To the MIC/SP jack on the Slave unit

9.1