Canon multipass mp390 手册
3
Pull out the tray extension of the
paper output tray.
paper output tray.
Install the ink tanks.
1
Prepare the ink tanks.
2
Insert the ink tanks.
Remove the protective
cap and discard it.
cap and discard it.
Black
Do not touch!
Click
Insert the black ink
tank into the right slot.
tank into the right slot.
Push it in until it
locks into place.
locks into place.
Insert the color ink
tank into the left slot.
tank into the left slot.
3
Close the inner cover
q
and
the scan unit
w
.
Load the paper.
1
Open the multi-purpose tray.
2
Load the paper.
Incorrectly
installed
installed
Correctly
installed
installed
Rear side a
NOTE
Pull it out until it stops.
q
Load the paper with the print side face up.
Ensure the paper stack does
not exceed paper limit mark.
not exceed paper limit mark.
Click
q
Lift it upward.
w
Pinch and adjust the
paper guide to the
width of the stack.
paper guide to the
width of the stack.
w
Pull up the tray
extension until it stops.
extension until it stops.
q
Open the tray.
w
Lower it into place.