Sony DCR-PC106E 用户手册
Dubb
ing/
E
E
d
iti
n
g
Dubbing/Editing
65
• Insert a cassette for recording.
• Set the input selector to input mode if your
• Set the input selector to input mode if your
VCR has one.
3
Prepare your camcorder (playing
device).
device).
• Insert a cassette for editing.
• Slide the POWER switch repeatedly to
• Slide the POWER switch repeatedly to
select the PLAY/EDIT mode.
4
Touch
to display [PAGE1].
5
Touch MENU.
6
Select
(OTHERS), then select
[VIDEO EDIT] with
/
,
then touch [EXEC].
7
Touch [EDIT SET].
8
Select [CONTROL] with
/
,
then touch [EXEC].
9
Select i.LINK or [IR].
When connecting with an i.LINK
cable
Select i.LINK with
cable
Select i.LINK with
/
, then
[EXEC]. Go on to “Step 2: Adjusting the
synchronization of the VCR” (p. 66).
synchronization of the VCR” (p. 66).
When connecting with an A/V
connecting cable
connecting cable
Select [IR] with
/
, then
[EXEC]. Follow the procedure described in
“To set the [IR SETUP] code” (p. 65).
“To set the [IR SETUP] code” (p. 65).
To set the [IR SETUP] code
When you connect with an A/V connecting
cable, you need to check the [IR SETUP] code
signal to see if your VCR can be operated by
your camcorder (infrared ray emitter).
cable, you need to check the [IR SETUP] code
signal to see if your VCR can be operated by
your camcorder (infrared ray emitter).
1
Select [IR SETUP] with
/
,
then touch [EXEC].
2
Select the [IR SETUP] code of your VCR
with
with
/
, then touch [EXEC].
For the [IR SETUP] code of your VCR,
refer to “[IR SETUP] code list” (p. 66).
When there is more than 1 code listed for
the manufacturer of your VCR, try each
code and find the most appropriate one.
refer to “[IR SETUP] code list” (p. 66).
When there is more than 1 code listed for
the manufacturer of your VCR, try each
code and find the most appropriate one.
3
Select [PAUSEMODE] with
/
, then touch [EXEC].
4
Touch
/
to select the mode to
cancel the recording pause on your VCR,
then touch [EXEC].
Refer to the operating instructions supplied
with your VCR for details on operation.
then touch [EXEC].
Refer to the operating instructions supplied
with your VCR for details on operation.
5
Point the infrared ray emitter of your
camcorder towards the remote sensor on
your VCR, from about 30 cm (12 in.)
away, with no obstructions.
camcorder towards the remote sensor on
your VCR, from about 30 cm (12 in.)
away, with no obstructions.
6
Insert a cassette into your VCR, and set
the VCR to recording pause.
the VCR to recording pause.
7
Select [IR TEST] with
/
,
then touch [EXEC].
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
”CUT - I N”
”CUT -OUT”
I R SETUP
PAUSEMODE
I R TEST
ED I T SET
CONTROL
ADJ TEST
”CUT - I N”
”CUT -OUT”
I R SETUP
PAUSEMODE
I R TEST
END
I R
EXEC
RET.
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
”CUT - I N”
”CUT -OUT”
I R SETUP
PAUSEMODE
I R TEST
ED I T SET
CONTROL
ADJ TEST
”CUT - I N”
”CUT -OUT”
I R SETUP
PAUSEMODE
I R TEST
I R
i. L I NK
i. L I NK
END
EXEC
RET.
Infrared ray emitter
VCR
Remote sensor
,continued