Sony STR-DH810 用户手册

When the measurement ends, a beep 
sounds and the measurement result 
appears on the display.

Press AMP and then press 

V/v repeatedly 

to select the item. Then, press 

.

Select “SAVE EXIT” in step 2.
“COMPLETE” appears on the display 
and the settings are registered as selected 
position number.

Press 

V/v repeatedly to select calibration 

type, then press 

.

If you have reposition your speaker, we recommend 
that you perform Auto Calibration again to enjoy the 
surround sound.

The size of a speaker (LARGE/SMALL) is 
determined by the low frequency characteristics.
The measurement results may vary, depending on 
the position of the optimizer microphone and 
speakers, and the shape of the room. It is 
recommended that you follow the measurement 
results. However, you can change those settings in 
the SPEAKER menu (page 74). Save the 
measurement results first, then try to change the 
settings if you want.

Completes properly 

 

[SAVE EXIT]

Proceed to step 
2.

Fails

 

[E - 

xxx

:

xx

]

EXIT
Exits the setting process without saving the 
measurement results.

LEVEL INFO.
Displays the measurement result for speaker 
level.

DIST. INFO.
Displays the measurement result for speaker 
distance.

PHASE INFO.
Displays the phase of each speaker (in phase/
out of phase). See “When you select “PHASE 
INFO.”” (page 39).

WARN CHECK
Displays warning concerning the 
measurement results. See “When you select 
“WARN CHECK”” (page 39).

SAVE EXIT
Saves the measurement results and exits the 
setting process.

RETRY
Performs the Auto Calibration again.

FULL FLAT
Makes the measurement of frequency from 
each speaker flat.

ENGINEER
Sets the frequency characteristics to a set that 
matches that of the Sony listening room 
standard.

FRONT REF
Adjusts the characteristics of all speakers to 
match the characteristics of the front speaker.

OFF
Sets the Auto Calibration equalizer level to 
off.