Sony STR-LV500 用户手册
Basic Oper
ations
masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY STR-
LV500\_DTP\4248914121\424891412STRLV500CEL\GB04BSC_STR-LV500-CEL.fm]
LV500\_DTP\4248914121\424891412STRLV500CEL\GB04BSC_STR-LV500-CEL.fm]
13
GB
model name1[STR-LV500]
[4-248-914-12(1)]
Press TUNING + to change the frequency
from low to high.
from low to high.
Press TUNING – to change the frequency
from high to low.
from high to low.
Tip
If “STEREO” flashes in the display and the FM stereo
reception is poor, press FM MODE to improve the
sound. You will not be able to enjoy the stereo effect,
but the sound will be less distorted.
reception is poor, press FM MODE to improve the
sound. You will not be able to enjoy the stereo effect,
but the sound will be less distorted.
Note
If “STEREO” does not appear at all when an FM
broadcast is received normally, press FM MODE to
turn on the “STEREO” indication.
broadcast is received normally, press FM MODE to
turn on the “STEREO” indication.
Preset tuning
After you have tuned in stations using
Automatic Tuning or Manual Tuning, you can
preset them to the receiver. Then you can tune in
any of the stations directly. Up to 30 FM or AM
stations can be preset. The receiver will also
scan all the stations that you have preset.
Before tuning to preset stations, be sure to preset
them by performing steps on “Presetting radio
stations”.
Automatic Tuning or Manual Tuning, you can
preset them to the receiver. Then you can tune in
any of the stations directly. Up to 30 FM or AM
stations can be preset. The receiver will also
scan all the stations that you have preset.
Before tuning to preset stations, be sure to preset
them by performing steps on “Presetting radio
stations”.
Presetting radio stations
1
Press FM or AM repeatedly to select FM
or AM band.
or AM band.
You can also use INPUT SELECTOR on
the system. The last received station is
tuned in.
the system. The last received station is
tuned in.
2
3
Press MEMORY.
“MEMORY” appears in the display for a
few seconds.
few seconds.
Do steps 4 to 5 before “MEMORY” goes
out.
out.
4
Press SHIFT to select the memory page
and press PRESET/CH + or PRESET/
CH – to select a preset number.
and press PRESET/CH + or PRESET/
CH – to select a preset number.
If “MEMORY” goes out before you press
the preset number, start again from step 3.
the preset number, start again from step 3.
5
Press MEMORY again to store the
station.
station.
If “MEMORY” goes out before you can
store the station, start again from step 3.
store the station, start again from step 3.
6
Repeat steps 2 to 5 to preset another
station.
station.
Tuning to preset stations
1
Press FM or AM repeatedly to select FM
or AM band.
or AM band.
You can also use INPUT SELECTOR on
the system. The last received station is
tuned in.
the system. The last received station is
tuned in.
2
Press PRESET/CH + or PRESET/CH –
repeatedly to select the preset station
you want.
repeatedly to select the preset station
you want.
Each time you press the button, the receiver
tunes in one preset station at a time, in the
corresponding order and direction as
follows:
tunes in one preset station at a time, in the
corresponding order and direction as
follows:
Tips
• In step 2, press SHIFT to select a memory page (A,
B, or C).
• You can also use PRESET TUNING +/– on the
receiver to tune to preset stations.
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T