Panasonic kx-tg1311bx 用户手册

20

Caution:
L

To avoid permanent damage, do not use a microwave oven to speed up 
the drying process.

{j

/OK}

{v}

/{e}: “SETTING HS” i {>}

{v}

/{e}: “REGISTRATION” i {>}

{v}

/{e}: “REGISTER HS” i {>}

Press and hold {x} on the base unit for about 5 seconds.
L

If all registered handsets start ringing, press {x} to stop, then start 
again from step 1.

L

The rest of the procedure must be completed within 4 minutes.

{v}

/{e}: Select a base unit number. i {>}

Wait until “BS PIN” is displayed. i Enter the base unit PIN (default: 
“0000”). i {>}

Caller information is not 
displayed.

L

You must subscribe to a Caller ID 
service. Contact your service provider/
telephone company for details.

L

If your unit is connected to any 
additional telephone equipment, 
remove and plug the unit directly into 
the wall jack.

L

If you use a DSL/ADSL service, we 
recommend connecting a DSL/ADSL 
filter between the base unit and the 
telephone line jack. Contact your DSL/
ADSL provider for details.

L

Other telephone equipment may be 
interfering with this unit. Disconnect the 
other equipment and try again.

Caller information is slow 
to display.

L

Depending on your service provider/
telephone company, the unit may 
display the caller’s information at 2nd 
ring or later.

L

Move closer to the base unit.

I cannot remember the 
PIN.

L

Change the PIN using the instructions 
on page 21.

Liquid or other form of 
moisture has entered the 
handset/base unit.

L

Disconnect the AC adaptor and 
telephone line cord from the base unit. 
Remove the batteries from the handset 
and leave to dry for at least 3 days. 
After the handset/base unit are 
completely dry, reconnect the AC 
adaptor and telephone line cord. Insert 
the batteries and charge fully before 
use. If the unit does not work properly, 
contact your nearest Panasonic service 
centre.

TG1311_1312_1313BX(e).book  Page 20  Tuesday, September 2, 2008  10:36 AM