Extron electronic IPL T PC1 用户手册
© 2007 Extron Electronics. All rights reserved.
Setup Guide
68-1386-01 A
06 07
IP Link Power Control Interface
IPL T PC1 and IPL T PC1i
c
Chapter 1
: Install Global Configurator.
• Install from the Software Products CD-ROM, or
• Download from Extron Web site.
• Download from Extron Web site.
c
Chapter 2
: Make the IPL T PC1 cable connections.
1
. c Power
2
. c Local Area Network (LAN)
3
. c Serial device
4
. c IR-controlled device
5
. c Switch or sensor (to contact closure Input port)
c
Chapter 3
: Create a Global Configurator project file, add a
device, and configure it. Build and upload the GC project
file. Launch the GlobalViewer
®
interface.
1. c Download device drivers.
2
. c Create a new Global Configurator project file.
3
. c Add a device.
4. c
Define the location of the new device.
5
. c Save the new Global Configurator file.
6
. c Enter contacts.
7
. c Create e-mail messages.
8
. c Enter output receptacle and contact input port
labels.
9
. c Assign device drivers.
10
. c Set scheduled actions and e-mail deliveries.
11
. c Set monitored conditions.
12
. c Build the Global Configurator file.
13
. c Upload the Global Configurator file.
14
. c Change device settings (if desired).
15
. c Launch the GlobalViewer
®
interface.
Setup Guide Checklist