用户手册目录Introduction5About this Manual6About the IPL T PC16About Global Configurator6System requirements7Installing Global Configurator7Downloading and installing from the Extron Web site7Installing from CD-ROM — Autorun enabled7Installing from CD-ROM — Autorun not enabled7Hardware Setup8Front Panel9Rear Panel9Connecting the Hardware10Wiring the Local Area Network (LAN) port10RS-232 port cabling11Accessing the Communication Sheet11Connecting to the display device11Wiring for IR control12Wiring the contact Input port12Software Setup12Creating a Global Configurator Project File13Step One: Download device drivers.13Step Two: Create a new project.14Step Three: Add a device.15Step Four: Define the location of the new device.16Step Five: Save the new Global Configurator file.16Step Six: Enter contacts.17Step Seven: Create e-mail messages.17Step Eight: Enter output receptacle and contact input port labels.18Step Nine: Assign device drivers.18Assigning a serial driver18Assigning an IR driver19Step Ten: Set scheduled actions and e-mail deliveries.20Selecting an action20Scheduling e-mail delivery21Step Eleven: Set monitored conditions.22Building and Uploading a GC File23Step Twelve: Build the Global Configurator file.23Step Thirteen: Upload the Global Configurator file.24Step Fourteen: Change device settings (if desired).24Launching the GlobalViewer Interface25Step Fifteen: Launch GlobalViewer.25文件大小: 2.7 MB页数: 27Language: English打开用户手册