Siemens gigaset sl55 用户手册

Gigaset SL55 / IM1 EN / A31008-M1752-B101-1-19 / start_guide_time.fm / 11.11.05

¤

With the pins to the front, insert the 

battery pack into the cavity at an angle 

from the right.

¤

Then press it into the housing from 

above until the bracket on the side of 

the battery back snaps securely into the 

housing.

To remove the battery pack, you must first 

press the bracket on the side.

¤

First, align the notches on the side of 

the battery cover with the protrusions 

on the inside of the housing.

¤

Then press the cover until it clicks into 

place.

There are notches for attaching the belt 

clip on the side of the handset at the same 

height as the display.

¤

Press the belt clip onto the back of the 

handset so that the protrusions on the 

belt clip engage with the notches.

¤

If fitted, remove the belt clip.

¤

Lift the device with the keypad in the 

palm of your hand.

¤

Insert your index finger into the notch 

on the lower edge. 

¤

Carefully lift the cover upwards out of 

the notches.

Only use the rechargeable Siemens original 

battery pack (page 23)! This means that you 

should never use a conventional (non-

rechargeable) battery pack, as this may cause 

significant damage to health and property. For 

example, the outer casing of the battery pack 

could be destroyed or the battery pack could 

explode. The phone could also malfunction or 

be damaged as a result of using batteries that 

are not of the recommended type.