Siemens gigaset sl55 用户手册

Gigaset SL55 / IM1 EN / A31008-M1752-B101-1-19 / start_guide_time.fm / 11.11.05

A Gigaset SL55 handset can be registered 

on up to four base stations. 
You must initiate handset registration on 

the handset and on the base. 
After it has registered, the handset returns 

to idle status. The internal number of the 

handset appears in the display, e.g. 

. 

If it does not, repeat the procedure.

To find out how to register the handset on 

the base station, see the user guide for the 

base station.

w

¢

Ð

¢

¢

s

Select base station, e.g. 

, and press 

§OK§

.

~

Enter the system PIN for the 

base station and press 

§OK§

 

(depending on the base sta-

tion). The following flashes in 

the display, e.g. 

.

¤

Plug the charging cradle mains adapter 

into a mains power socket.

¤

Place the handset in the charging cra-

dle with the display facing forward.

To charge the battery pack, leave the 

handset in the charging cradle. 

For questions and problems see page 22.

If the handset is activated, the flashing 

battery icon 

e in the top right of the dis-

play indicates that the battery pack is 

being charged. 
During handset operation, the battery 

icon indicates the charge status of the bat-

tery pack (page 1). The correct charge sta-

tus can only be displayed if the battery 

pack is first fully charged and discharged. 

¤

To do this, leave the handset in the 

charging cradle continuously for ten 

hours. Your handset need not be 

switched on for it to charge. 

¤

Afterwards, remove the handset from 

the charging cradle and do not put it 

back again until the battery pack is fully 

discharged. 

u Always repeat the charging and dis-

charging procedure if you remove the 

battery pack from the handset and 

insert it again.

u The battery pack may warm up as it is 

charging. This is not dangerous.

u After a time the charge capacity of the 

battery pack will decrease for technical 

reasons.

¤

Set the date and the time, for example 

to ensure the correct time of incoming 

calls is recorded.

The date and time must be set in order to, 

e.g. have the correct time for incoming 

calls and be able to use the alarm clock 

and calendar.

¤

If you have not yet set the date and 

time, press the display key 

§Time§

 to open 

the input field. 

– If the handset has switched itself off 

because the battery pack is flat and is then 

placed in the charging cradle, it will switch 

itself on automatically.

– Only place the handset in the charging cra-

dle that is intended for it.

After the first battery charge and discharge, 

you may replace your handset in the charging 

cradle after every call.