Epson stylus cx5000 用户手册
42
Solving Problems
Problems and Solutions
Check the solutions below if you’re having trouble using your Epson Stylus
CX5000 Series all-in-one.
CX5000 Series all-in-one.
Printing and Copying Problems
■
Make sure your original is positioned in the top left corner of the glass. If the
edges are cropped, move your original away from the edges slightly.
edges are cropped, move your original away from the edges slightly.
■
Make sure your paper is loaded short edge first and is positioned against the
right edge guide with the left edge guide against its left side. Don’t load paper
above the arrow mark inside the left edge guide.
right edge guide with the left edge guide against its left side. Don’t load paper
above the arrow mark inside the left edge guide.
■
Make sure the paper size settings are correct for the paper you loaded.
b
Error: Flashing
fast
H
The paper thickness
lever is set to the
lever is set to the
^
H position.
If you have set the lever to the
^
H position because you are
printing envelopes, press
x
x
Start Color to continue.
Otherwise, set the lever to the
m
L position.
b
Error: On
B
Ink: On
All other lights:
Flashing
Flashing
E
A CX5000 Series part
needs to be replaced.
needs to be replaced.
All lights:
Flashing
Flashing
E
There is a problem
with the CX5000
Series.
with the CX5000
Series.
Turn the CX5000 Series off and
then back on. If the error does
not clear, contact your local
authorized servicer or contact
Epson for a referral; see
page 44.
then back on. If the error does
not clear, contact your local
authorized servicer or contact
Epson for a referral; see
page 44.
Light: status
Copies
window status
window status
Cause
Solution