Aleratec 350103 用户手册
www.aleratec.com
37
Using the 1:1 HDD Copy Cruiser
Advanced Setup Menu
10-03 Update Firmware
10-03 Update Firmware
This function is used to update the 1:1 HDD Copy Cruiser firmware to a later
version.
Note: Firmware updates are available from Aleratec technical support.
1.a CD method
Open the case of the 1:1 HDD Copy Cruiser. Disconnect the SATA cable
from the blue connector on the controller board. Connect a SATA DVD/
CD drive (not included) to the blue connector. Place the firmware CD in the
DVD/CD drive.
1.b Hard Drive method
Format a hard drive and create a single partition to the smallest capacity
allowable. Copy the firmware file into the root directory of this partition.
2. Power on the 1:1 HDD Copy Cruiser. Once the system has completed its
startup process, press and hold the ESC button for about 3 seconds to access
“Adv Setup”. The following screen will be displayed.
3. Use the arrow buttons () to select “Update Firmware”, and then press
ENT. The system will begin scanning for a new firmware version. If found,
screens similar to the following will be displayed.
4. Press ENT to begin the firmware update. If the upgrade is successful, the
system will restart automatically.
ENT
ESC
10. Adv Setup
Searching F/W...
Please Wait...
Please Wait...
Update F/W
1.04N
To *.** Yes