HP Compaq KB-9965 311059-221 用户手册

To install a DIMM: 

1.  Remove the memory board. Refer to “Removing a Memory Board” in this chapter. 

2.  Observe all DIMM installation requirements for the desired memory mode. Refer to the 

“DIMM Installation Requirements” section in this chapter for each mode. 

 

  Follow all DIMM configuration requirements carefully. If the DIMMs are not 

configured properly, you will receive an error message during POST and the DIMM LEDs will blink 

amber. 

3.  Align the keyed portion of the bottom edge of the DIMM with the tab in the DIMM slot. 

 

  The bottom edge of the DIMM is designed so that it fits into the DIMM slot only one 

way. 

4.  Press the DIMM firmly into the slot (1). 

5.  Push the latches into place (2).