Autostart as-1452 hf 用户手册

下载
页码 10
P. 6 
User Guide
  
Valet Modes 
When your vehicle is in Valet Mode, the remote starter functionalities are disabled. If the 
vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine 
from being remote-started accidentally. 
Valet Mode using the Valet Button 
(If installed) 
To put the system into Valet Mode: 
1.  Turn the key to the 
IGNITION ON (RUN)
 position. 
2.  Press (for at least 1 second) and release the Valet Button. The L.E.D. will come 
ON
To take the system out of Valet Mode: 
1.  Turn the key to the 
IGNITION ON (RUN)
 position. 
2.  Press (for at least 1 second) and release the Valet Button. The L.E.D. will go 
OUT
The Valet button can only be used if the vehicle keys are in the 
IGNITION ON (RUN)
 position. 
Ignition Valet 
The system can be placed in Valet Mode to disable the remote starting capabilities. If the 
vehicle needs to be serviced, or if you park it indoors, Valet Mode will prevent the engine 
from being accidentally started by remote control. 
To ENTER Valet Mode 
1.  With the key in the Ignition switch, turn the key to the 
ON (RUN/IGNITION) 
and then 
OFF 
positions 5 times within 10 seconds. 
2.  The Parking Light will flash 3 times indicating the Module is now in Valet Mode.  
The LED will turn
 ON 
solid. 
To EXIT Valet Mode 
3.  With the key in the Ignition switch, turn the key to the 
ON (RUN/IGNITION) 
and then 
OFF 
positions 5 times within 10 seconds. 
4.  The Parking Light will flash twice indicating the Module is now out of Valet Mode.  
The LED will turn 
OFF
Panic Mode 
Note:   Panic mode can only be activated if the horn has been adequately configured 
by your installer. 
 
In an emergency situation, you can activate Panic Mode using the 
LOCK
 or 
UNLOCK
 button. 
This will: 
• shut down the engine, 
• unlock the doors (with the 
UNLOCK
 button) 
• or lock the doors (with the 
LOCK
 button), 
• disarm the Starter Kill and 
• activate the horn for 
25
 sec. 
 
Note: See the description of the Starter Kill option later in this Guide. 
To activate Panic Mode: 
•  Press and hold the 
UNLOCK
 button for approximately 3 sec. until the sound signal starts 
and the parking lights flash: this will unlock the doors before the sound signal starts. 
•  Or press and hold the 
LOCK
 button for approximately 3 seconds until the sound signal 
starts and the parking lights flash: this will lock the doors before the sound signal 
starts. 
Panic Mode will automatically shut down after 
25
 sec. 
Note: To stop Panic Mode before the end of its delay, press the 
LOCK
 or 
UNLOCK
 button 
until the sound signal stops.