Philips AZ1316 用户手册
Autostore
Autostore automatically starts programming radio sta-
tions from preset 1. Any previous presets e.g. manual-
ly programmed will be erased.
1 Select MW or FM.
2 Press PROG until flashes.
Autostore automatically starts programming radio sta-
tions from preset 1. Any previous presets e.g. manual-
ly programmed will be erased.
1 Select MW or FM.
2 Press PROG until flashes.
™Available stations are programmed (MW or FM).
After all stations are stored, the first autostore pre-
set station will then automatically play.
After all stations are stored, the first autostore pre-
set station will then automatically play.
To listen to a preset or autostore station
Press the ALBUM/PRESET -, + (on the remote con-
trol
Press the ALBUM/PRESET -, + (on the remote con-
trol
3,4) buttons once or more until the desired pre-
set station is displayed.
Changing tuning grid (some versions only)
In North and South America the frequency step
between adjacent channels in the MW (AM) and FM
band are 10 KHz and 100 KHz respectively. In the rest
of the world this step is 9 KHz and 50 KHz. Usually
the frequency step has been preset in the factory for
your area.
1. Select MW source.
2. Press MODE on the set for at least 5 seconds.
In North and South America the frequency step
between adjacent channels in the MW (AM) and FM
band are 10 KHz and 100 KHz respectively. In the rest
of the world this step is 9 KHz and 50 KHz. Usually
the frequency step has been preset in the factory for
your area.
1. Select MW source.
2. Press MODE on the set for at least 5 seconds.
™ The display shows either
Gr9 or Gr10.
Helpful hints: All preset stations will be affected
and you may need to reprogramme stations.
CD PLAYER
About MP3
The music compression technology MP3 (MPEG1
Audio Layer 3) significantly reduce the digital data of
an audio CD while maintaining CD quality sound.
The music compression technology MP3 (MPEG1
Audio Layer 3) significantly reduce the digital data of
an audio CD while maintaining CD quality sound.
•
Getting MP3 files: you can either download legal
music files from the internet to your computer hard
disc, or create such files by converting audio CD
files in your computer through appropriate encoder
software. (128kbps bit rate or higher is recom-
mended for MP3 files.)
music files from the internet to your computer hard
disc, or create such files by converting audio CD
files in your computer through appropriate encoder
software. (128kbps bit rate or higher is recom-
mended for MP3 files.)
•
Creating a MP3 CD: burn the music files from
your computer hard disc on a CDR or CDRW using
your CD burner.
your computer hard disc on a CDR or CDRW using
your CD burner.
Helpful hints:
–
Make sure that the file names of the MP3 files end
with .mp3
with .mp3
.
–
Total number of music files and albums: around 350
(with a typical file name length of 20 characters)
(with a typical file name length of 20 characters)
–
The length of file names affects the number of
tracks for playback. With shorter file names, more
files can be burned on a disc.
tracks for playback. With shorter file names, more
files can be burned on a disc.
Playing a CD
This player plays Audio Discs including CD-R/ CD-RW,
and MP3 CD. Do not try to play a CD-ROM, CD-I, CDV,
VCD, DVD or computer CD.
This player plays Audio Discs including CD-R/ CD-RW,
and MP3 CD. Do not try to play a CD-ROM, CD-I, CDV,
VCD, DVD or computer CD.
IMPORTANT!
•
CDs encoded with copyright protection tech-
nologies by some record companies may be
unplayable by this product.
nologies by some record companies may be
unplayable by this product.
•
For a disc with CD Audio tracks and MP3
files, the MP3 files may be unplayable,
depending on the encoding software.
files, the MP3 files may be unplayable,
depending on the encoding software.
•
Total
number of albums + tracks: Max. 500
(for MP3)
1 Push the source selector to CD/MP3.
2 Insert a CD with the printed side facing up and
2 Insert a CD with the printed side facing up and
close the CD door.
™
™
is displayed as the CD player scans
the contents of a disc and then
Audio CD: total playing time and total number of
tracks appear.
MP3: total number of tracks/albums appear. (See
3)
Audio CD: total playing time and total number of
tracks appear.
MP3: total number of tracks/albums appear. (See
3)
3 Press
2; to start playback.
4 To pause playback press
2;. Press 2; again to
resume play.
5 To stop CD playback, press
9.
Helpful hints: CD play will also stop when:
– the CD door is opened
– the CD has reached the end
– you select tuner or tape source.
– the CD has reached the end
– you select tuner or tape source.
Selecting a different track
• Press
• Press
∞ or § (on the remote control ¡ or ™)
once or repeatedly until the desired track number
appears in the display.
For MP3-CD: first press ALBUM/PRESET -, +
(on the remote control
appears in the display.
For MP3-CD: first press ALBUM/PRESET -, +
(on the remote control
3,4) once or more to find
your album.
• In the pause/stop position, press
2; to start play-
back.
Finding a passage within a track
1 During playback, press and hold
1 During playback, press and hold
∞ or § (or
SEARCH
5, 6 on the remote control).
™ The CD is played at high speed and low volume.
2 When you recognize the passage you want, release
∞ or § to resume normal playback.
Different play modes: SHUFFLE and REPEAT
(See 4, 5)
You can select and change the various play modes
before or during playback, and combine REP ALL and
REP with PROG.
(See 4, 5)
You can select and change the various play modes
before or during playback, and combine REP ALL and
REP with PROG.
SHUF – tracks of the entire CD are played in ran-
dom order
REP ALL – repeats the entire CD/program
REP – plays the current track continuously
REP – plays the current track continuously
For MP3 only:
REP ALB – all tracks of current album play repeat-
edly.
1 To select play mode, press MODE (SHUFFLE or
REPEAT on the remote control) once or more.
2 Press
2; to start playback if in the stop position.
3 To select normal playback, press MODE repeatedly
until the various modes are no longer displayed.
– You can also press
– You can also press
9 to cancel your play mode.
Helpful hints: In shuffle mode, press
∞ ( ¡ on the
remote control) to go to the beginning of current
track
track
Programming track numbers
You may store up to 20 tracks (for MP3-CD: 10 tracks)
in the desired sequence. If you like, store any track
more than once.
1 In the stop position, press
in the desired sequence. If you like, store any track
more than once.
1 In the stop position, press
∞ or § (on the remote
control
¡ or ™) to select your desired track num-
ber.
For MP3-CD: first press ALBUM/PRESET -, + (on
the remote control
the remote control
3,4) once or more to find your
album.
2 Press PROG.
2 Press PROG.
➜Display first shows the number of program location
and then, track/album number stored here. (See
6, 7)
6, 7)
• If you attempt to program without first selecting a
track number,
is shown.
3 Repeat steps 1-2 to select and store all desired
tracks.
• Display:
if you try to program more than
20 tracks (for MP3-CD: 10 tracks).
Helpful hints:
– When the PROG or SHUF mode is active, use of
the - , + keys (or
the - , + keys (or
3,4 on the remote control) are
void.
Reviewing the programme
In the stop position, press PROG repeatedly to see
your stored track numbers.
your stored track numbers.
➜Display first shows the number of program location
and then, track/album number stored here.
and then, track/album number stored here.
Erasing a programme
You can erase the contents of the memory by:
• opening the CD door;
• selecting MW, FM or TAPE sound sources;
• pressing
You can erase the contents of the memory by:
• opening the CD door;
• selecting MW, FM or TAPE sound sources;
• pressing
9 twice during playback or once in the
stop position.
™ PROG disappears.
™ PROG disappears.
DIGITAL TUNER
CD/MP3 PLAYER
CD/MP3 PLAYER