Philips AZ1316 用户手册
CASSETTE RECORDER
Cassette playback
1 Push the source selector to TAPE..
2 Insert a cassette and close the door.
3 Press PLAY
1 Push the source selector to TAPE..
2 Insert a cassette and close the door.
3 Press PLAY
1 to start playback.
Display: shows
throughout tape opera-
tion.
4 To pause, press PAUSE
;. Press again to resume.
5 To stop the tape, press STOP/OPEN
9/.
Fast forwarding/rewinding
1
Press SEARCH
5 or 6 until you reach your
desired passage.
2
Press
9/ to stop fast forwarding/rewinding.
Helpful hints:
–
–
During playback, the keys are automatically
release at the end of a tape, and the set is
switched off (except if
release at the end of a tape, and the set is
switched off (except if
; has been activated).
–
During fast winding/rewinding, the keys will not
be released at the end of a tape. To switch off
the set, make sure the cassette keys are also
released.
be released at the end of a tape. To switch off
the set, make sure the cassette keys are also
released.
GENERAL INFORMATION ON RECORDING
• Recording is permissible insofar as copyright or.
other rights of third parties are not infringed.
• For recording, use only NORMAL type cassettes
(IEC type I) on which the tabs have not yet been
broken. This deck is not suited for recording on
CHROME (IEC II) or METAL (IEC IV) type cassettes.
broken. This deck is not suited for recording on
CHROME (IEC II) or METAL (IEC IV) type cassettes.
• The best recording level is set automatically.
Altering the VOL or DBB controls will not affect
the recording.
the recording.
• To protect a tape from accidental erasure, break
out the tabs. If you wish to record again, cover the
tabs with a piece of adhesive tape.
tabs with a piece of adhesive tape.
CD Synchro Start recording
1 Select CD/MP3 function.
2 Insert a CD and if desired, programme track num-
1 Select CD/MP3 function.
2 Insert a CD and if desired, programme track num-
bers.
3 Open the cassette door.
4 Insert a suitable tape into the cassette deck and
4 Insert a suitable tape into the cassette deck and
close the door.
5 Press RECORD
0 to start recording.
™ Playing of the CD/program starts automatically
from the beginning. You don’t need to start the
CD player separately.
CD player separately.
™ Display: shows
briefly.
6 To pause recording, press PAUSE
;.
Press PAUSE
; again to resume recording.
7 To stop recording, press STOP/OPEN
9/.
Recording from the Radio
1 Tune to the desired radio station (see Tuning to
1 Tune to the desired radio station (see Tuning to
radio stations).
2 Follow steps 3-7, under CD Synchro Start record-
ing.
TAPE
CASSETTE RECORDER
Environmental information
We have done our best to reduce the packaging and make it easy to separate into 3 materi-
als:cardboard, expandable polystyrene, polyethylene.
Your set consists of materials which can be recycled if disassembled by a specialized company.
Please observe the local regulations regarding the disposal of packaging, exhausted batteries
and old equipment.
als:cardboard, expandable polystyrene, polyethylene.
Your set consists of materials which can be recycled if disassembled by a specialized company.
Please observe the local regulations regarding the disposal of packaging, exhausted batteries
and old equipment.
Maintenance & Safety (See 8, 9)
CD player and CD handling
• If the CD player cannot read CDs correctly, use a
• If the CD player cannot read CDs correctly, use a
cleaning CD to clean the lens before taking the set
to repair.
to repair.
• The lens of the CD player should never be touched!
• Sudden changes in the surrounding temperature
• Sudden changes in the surrounding temperature
can cause condensation on the lens of your CD
player. Playing a CD is then not possible. Do not
attempt to clean the lens but leave the set in a
warm environment until the moisture evaporates.
player. Playing a CD is then not possible. Do not
attempt to clean the lens but leave the set in a
warm environment until the moisture evaporates.
• Always close the CD door to avoid dust on the
lens.
• To clean the CD, wipe in a straight line from the
centre towards the edge using a soft, lint-free
cloth. Do not use cleaning agents as they may
damage the disc.
cloth. Do not use cleaning agents as they may
damage the disc.
• Never write on a CD or attach any stickers to it.
Safety Information
•
Place the set on a hard, flat and stable surface so
that the system does not tilt.
that the system does not tilt.
•
Do not expose the set, batteries, CDs to humidity,
rain, sand or excessive heat caused by heating
equipment or direct sunlight.
rain, sand or excessive heat caused by heating
equipment or direct sunlight.
•
The apparatus shall not be exposed to
dripping or splashing.
dripping or splashing.
•
Adequate ventilation with a minimum gap of 15
cm between the ventilation holes and surrounding
surfaces is necessary to prevent heat build-up.
cm between the ventilation holes and surrounding
surfaces is necessary to prevent heat build-up.
•
The ventilation should not be impeded by cover-
ing the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc..
ing the ventilation openings with items, such as
newspapers, table-cloths, curtains, etc..
•
No objects filled with liquids, such as vases, shall
be placed on the apparatus.
be placed on the apparatus.
•
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
should be placed on the apparatus.
•
The mechanical parts of the set contain
self-lubricating bearings and must not be oiled or
lubricated.
self-lubricating bearings and must not be oiled or
lubricated.
•
To clean the set, use a dry cloth. Do not use any
cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.
cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.
Tape deck maintenance
To ensure quality recording and playback of the tape
deck, clean parts A, B and C as shown, once a
month. Use a cotton bud slightly moistened with alco-
hol or a special head cleaning fluid to clean the deck.
1 Open the cassette door.
2 Press PLAY
To ensure quality recording and playback of the tape
deck, clean parts A, B and C as shown, once a
month. Use a cotton bud slightly moistened with alco-
hol or a special head cleaning fluid to clean the deck.
1 Open the cassette door.
2 Press PLAY
1 and clean the roller C.
3 Press PAUSE
; and clean the heads A, and the
capstan B.
4 After cleaning, press STOP/OPEN
9/.
MAINTENANCE & SAFETY