bobcat s205 用户手册

下载
页码 145
S205 Skid-Steer Loader
Operation & Maintenance Manual
20
Selectable Joystick Control (SJC) In ‘ISO’ Control 
Pattern
Figure 36
Lift Arm Operation - (Right Hand Joystick)
Move the joystick backward (1) [Figure 36] to raise
the lift arms.
Move the joystick forward (2) [Figure 36] to lower the
lift arms.
Lift Arm Float Position - (Right Hand Joystick)
Press and hold the Float Button (3) [Figure 36] while
the joystick is in neutral. Move the joystick to lift arm
down position (2) [Figure 36], then release the
button.
Press Float Button (3[Figure 36]  again or move the
joystick to lift arm up position (1) [Figure 36] to
disengage.
Use the float position of the lift arms to level loose
material while driving backward.
Figure 37
Tilt Operation - (Right Hand Joystick)
Move the joystick inward (4) [Figure 37] to tilt the
bucket backward.
Move the joystick outward (5) [Figure 37] to tilt the
bucket forward.
Bucket Position Valve Operation (If Equipped)
The function of the bucket position valve is to keep the
bucket in the same approximate position it is in before
you begin raising the lift arms.
Figure 38
Press BUCKET POSITIONING button (1) [Figure 38] to
engage the bucket position function. (The light will be on.)
Press again to disengage.
Bucket Positioning functions only during upward lift cycle.
If the Bucket Positioning button is pressed and held for
2 seconds, the Warning and Shutdown status will be
displayed (2) [Figure 38]. (See SHUTDOWN FEATURE
on Page 115
.)
B-155541
B-15781
5
4
3
2
1
Right Joystick
B-15518
B-15781
5
4
3
2
1
Right Joystick
B-15551
1
2