Motorola 7.7.4 用户手册

189

The following table provides guidelines for entering and formatting CONFIG commands.

If a command is ambiguous or miskeyed, the CLI prompts you to enter additional informa-
tion. For example, you must specify which vir tual circuit you are configuring when you are 
setting up a Motorola Netopia® Gateway.

You can use the 

command to display the current CONFIG settings for your Motorola 

Netopia® Gateway. If you enter the 

command at the top level of the CONFIG hierar-

chy, the CLI displays the settings for all enabled functions. If you enter the 

 command 

at an intermediate node, you see settings for that node and its subnodes.

The Motorola Netopia® Gateway command line inter face includes a step mode to auto-
mate the process of entering configuration settings. When you use the CONFIG step mode, 
the command line inter face prompts you for all required and optional information. You can 

Command verbs

CONFIG commands must start with a command verb (set, view, delete).

You can truncate CONFIG verbs to three characters (set, vie, del).

CONFIG verbs are case-insensitive. You can enter “SET,” “Set,” or “set.”

Keywords

Keywords are case-insensitive. You can enter “Ethernet,” “ETHERNET,” or 
“ethernet” as a keyword without changing its meaning.

Keywords can be abbreviated to the length that they are differentiated from 
other keywords. 

Argument Text

Text strings can be as many as 64 characters long, unless otherwise speci-
fied. In some cases they may be as long as 255 bytes.

Special characters are represented using backslash notation.

Text strings may be enclosed in double (“) or single (‘) quote marks. If the 
text string includes an embedded space, it must be enclosed in quotes.

Special characters are represented using backslash notation.

Numbers

Enter numbers as integers, or in hexadecimal, where so noted.

IP addresses

Enter IP addresses in dotted decimal notation (0 to 255).