Motorola AX 用户手册

A

B

C

D

Scan allows you to monitor multiple channels and receive calls that are transmitted on them. Two types of scan are supported: Normal 

Scan and Priority Scan.

Normal Scan searches all channels sequentially in the radio’s scan list, whereas Priority Scan allocates 50% of the scanning time to the 

Priority Channel (the first channel in the designated scan list).

During scan, when activity is detected that meets the unsquelch condition, the radio stops scanning and switches to that channel; the 

G

 indicator is illuminated, and the channel number is displayed. When no activity is detected for a pre-set time, the radio resumes 

scanning.

If your radio has switched to a non-priority channel during priority scan, it still checks for activity on the priority channel. If activity is 

detected there, the radio switches to the priority channel.

The radio transmits on the Prime Channel, if PTT is pressed during scanning. If the radio has stopped scanning, and changed to a 

particular channel, all transmit and receive activity is performed on that channel.

• Press the Scan button to begin channel scanning. The G indicator blinks to indicate that the radio is scanning. The LCD Screen 

shows the Prime Channel where the scan began.

• Press the

button to scan the channels in incremental order, and the

button to scan in the opposite order.

• Press Scan button to stop scanning.

A channel with unwanted activity is called a Nuisance Channel. You can remove a Nuisance Channel from the scan list temporarily. To 

remove a Nuisance Channel

• Press the Nuisance Channel Delete button, when your radio stops on a Nuisance Channel. A high-pitched tone is heard.

You cannot remove the Prime or Priority Channel from the scan list. If attempted, a low-pitched tone is heard, and no action is taken.

To reinstate the deleted channel(s) into the scan list, restart scan, or simply turn off your radio and turn it on again.

This mode allows you to change feature parameters to enhance the use of your radio.

Entering Programming Mode
If your radio is turned on, turn it off. Press and hold the Monitor button, and turn on your radio. A ringing tone is heard, indicating that your 

radio is in Programming Mode. The K indicator illuminates and RW is displayed.

Exiting Programming Mode
Turn off the radio, to exit Programming Mode.

Accessing Programming Mode Parameters
Press PTT to scroll forward or the Monitor button to scroll backwards through the features available in the Programming Mode. Press the 

button to scroll through the parameters for each feature.

Squelch Level
(SQL-XX)

SQL-00, …, SQL-15

Select low level when you need to receive very weak
signal, and select high level when the communications distance is near.

Scan List 1
(SCANLST1)

1-01-XXX, …,
1-16-XXX,
XXX denotes channel number.

Up to 16 members per scan list. First member is assigned as Priority Channel, 
if Priority Scan is started. When scanning is started, only these 16 members 
will be scanned.

Time Out Timer
(TOT-XXX)

TOT-OFF, TOT-001, …, TOT-010

This determines the maximum duration (in minutes) that you can transmit 
continuously.

Battery Saver
(BS-XXXX)

BS-OFF,
BS-NORM,
BS-ENH

Battery Saver helps to extend your battery life. When enabled, it turns off 
radio receiver circuitry periodically when no activity is detected. BS-NORM 
(Normal) turns off the radio less frequently; select this if you want to save bat-
tery, but expect a Selective Call. BS-ENH (Enhanced) turns off the receiver 
for a longer duration; select this if you want to maximize battery saving and 
do not expect to receive any Selective Call.

Battery Type
(BT-XXXX)

BT-NIMH,
BT-NICD,
BT-ALK

Selects the type of battery that your radio uses: NIMH (Nickel Metal 
Hydride), NICD (Nickel Cadmium) or ALK (Alkaline).

Alert Tone Volume
(BEEP-X)

BEEP-OFF, BEEP-1,
BEEP-2,
BEEP-3

Selects the alert tone volume needed. Select BEEP-OFF, if you require quiet 
operation, or BEEP-3, if working in a noisy environment.

Prime Channel Select
(PRM-XXX)

PRM-OFF, PRM-001, ….,
PRM-XXX,
XXX denotes the highest channel 
number supported by your model.

The Prime Channel is the channel that you wish to spend most of your time 
monitoring. The radio will always switch back to the Prime Channel if it is 
idle for more than the pre-programmed hang-time in other channel.

Backlight  Select
(LGT-XXXX)

LGT-AUTO, LGT-TOGL

Selecting LGT-TOGL makes the Backlight button a toggle to control the ON/
OFF status of the LCD backlight. Selecting LGT-AUTO causes the backlight 
to automatically extinguish, if there is no keypress for more than 5 seconds. 
Pressing the Backlight button prolongs illumination time.

• Displays selected channel, programming parameters, status messages and any error or information messages.

L

Keypad lock indicator

Illuminates when your keypad is locked.

J

Talkaround indicator

Illuminates when you are not transmitting through the repeater.  Extinguishes 
when you are transmitting using the repeater offset/user-defined transmit 
frequency.

Battery level indicator 

Shows remaining charge in battery based on how many bars are displayed.

B

Power level indicator

“L” illuminates to indicate radio transmits in low power; “H” illuminates to 
indicate radio transmits in high power.

C

Monitor indicator

Illuminates when monitoring a selected channel.

K

Programming Mode 
indicator

Illuminates when in Programming Mode.

H

Scan indicator

Blinks, without the dot, when scan is activated.  Illuminates when there is 
some activity on a non-priority channel. Illuminates, with dot blinking, 
indicates that there is some activity on the priority channel.

Signal Strength Indicator

Shows the signal strength.  Six bars indicate the strongest signal.

• If the radio is off, turn this knob clockwise to turn 

the radio on.

• If the radio is on, turn this knob counter-clockwise 

to turn the radio off.

• Turn this knob clockwise to increase the volume.
• Turn this knob counter-clockwise to decrease the 

volume.

• Used to monitor the channel for any 

activity; squelch is disabled.

• Press and speak to microphone to send 

message.

• Release and listen to receive messages.

• Speak into the microphone when send-

ing message.

• Used to select a channel in Normal 

Mode.

• Used to select a parameter in Program-

ming Mode.

• Used to change the scanning direction.

• You will hear received messages through 

the speaker.

• Used to connect compatible 

accessories to your radio.

Red

Illuminated Radio is transmitting.

Red

Blinking

Battery voltage is low.

Green

Illuminated Radio is receiving.

• Lower port of the radio.
• Used to program your radio.

• Used to select various functions. These functions can be assigned as a short press (press and release) or a 

long press (press and hold for 1 second).

• The default functions programmed to your radio are described in the table below.

• Although your radio is programmed with default functions, you have the ability to re-program the radio’s 

programmable buttons. You may want to write down the new functions in the table below.

Channel Alias

1

1. Parameter values are preserved, even after the radio is turned off.

Toggles display between Channel Number and Channel Alias.

Backlight

Toggles backlight display between On and Off.

Keypad Lock

Locks or unlocks all buttons except PTT, Monitor and On/Off/Volume Knob.

Nuisance Channel 
Delete

Removes unwanted channel(s) temporarily from scan list during scan.

PL/DPL Enable

2

2. Turning off the radio or changing the channel restores this setting to the default value of the active channel.

Enables or disables radio from requiring matching PL/DPL to unsquelch.

Prime Channel

Quick move to the pre-programmed “Prime” channel

Power Select

Selects required power level: High or Low.

Scan

Starts or stops channel scan.

Squelch Level

Selects desired squelch level.  Use the 

 button to choose desired level (Level 0 will 

unsquelch radio unconditionally, whereas Level 15 will set tightest squelch).

Talkaround

Enables or disables radio to transmit in Talkaround mode.

No Operation

No function is programmed to this button.

Alert Tone Volume

Selects the alert tone volume needed for quiet operations or a noisy environment.

Prime Channel

Scan On/Off

Power Select

Backlight On/Off

Channel Alias

Nuisance Channel 

Delete

No operation

Kepad Lock

Refer to this table for the frequencies and codes for your radio:

1

464.5000

151.6250

67.0

2

464.5000

151.6250

77.0

3

464.5000

151.6250

88.5

4

464.5000

151.6250

179.9

5

464.5000

151.6250

None

6

464.5500

151.9550

67.0

7

464.5500

151.9550

82.5

8

464.5500

151.9550

94.8

9

464.5500

151.9550

179.9

10

464.5500

151.9550

None