Motorola HS820 用户手册

Your phone and headset are now paired 

and ready to make and receive calls. 

To make a call: 

Place the headset over your ear.

On your phone, dial the number you want 

to call and press the SEND key.

If your phone and headset are successfully 

paired, you will hear ringing on the headset.

After you have successfully paired your 

phone and headset, you do not need to 

repeat these steps. For daily use, ensure 

that your headset is turned ON and that 

your phone's Bluetooth feature is ON.

To conserve battery power, turn OFF the 

headset when you will not be using it for an 

extended time.

Make sure the blue light on your headset is on 

and steady when your phone is searching for 

devices (see step 2).

Make sure your phone is on and the Bluetooth 

feature is turned on in your phone (step 3). If 

the Bluetooth feature has been turned off, you 

may need to restart the Bluetooth feature (see 

step 3) and pair your phone and headset again 

(see step 2).

MOTOROLA and the Stylized M Logo are registered in the US 
Patent & Trademark Office. The Bluetooth trademarks are 
owned by their proprietor and used by Motorola, Inc. under 
license. All other product or service names are the property of 
their respective owners.  © Motorola, Inc. 2005.

Motorola, Inc.

Consumer Advocacy Office

1307 East Algonquin Road

Schaumburg, IL 60196 USA

Guide Number: 6809494A71 -A

Charge your headset for 2 hours:

Plug the Motorola charger into the top of 

the headset with the release tab facing 

down.

The blue light turns on when the 

headset is charging. It may take up to 1 

minute for the blue light to turn on. 

When the headset is fully charged (about 

2 hours), the blue light turns off.

Unplug the charger from the headset.

To turn on the headset, press and hold the 

Call E button on your Bluetooth headset for 5 

seconds. The blue light will flash rapidly and 

then flash slowly.

To answer or end a call, press the

Call E button on the headset.

To adjust the volume, press the Volume 

buttons (shown in step 2) on the headset. 

NOTE: The Volume buttons are initially set up 

for wearing your headset on your right ear (like 

shown in step 2)--with the top button used to 

increase volume. You can set which button is 

used to increase volume by pressing and 

holding the desired Volume button (along with 

the Call E button) while turning on the 

headset.

To turn off the headset, press and hold the 

Call E button on your Bluetooth headset for 5 

seconds. The blue light will flash rapidly and 

then stop flashing.

Press and hold the Call E button for 6 to 10 

seconds until the blue light turns on and 

remains on. 

NOTE: The blue light will flash as you press 

and hold the Call E button. Continue 

holding down the Call E button until the 

blue light is steadly lit.

NOTE: If you let go of the Call E button 

before the blue light is on and steady, 

ensure that your headset is off before trying 

again (see QUICK TIPS for instructions on 

turning off your headset).

Ensure the headset is powered off (the blue 

light is not blinking).

Before you can use your headset, you must pair 

(bond) it with your phone.

Call Button

Blue Light

Volume
Buttons

Press 

(Menu)

       key.

Select 

Settings.

Select 

Connection.

Select 

Bluetooth Link

Select 

Setup

Scroll to 

Power 

and select CHANGE.

Select 

On.

Your phone's Bluetooth feature is off by default. 

To use your headset, the Bluetooth feature 

must be turned on in your phone.

To turn on Bluetooth:

M(

Select 

Select 

Handsfree.

Select 

[Look For Devices].

NOTE: Do not select STOP---you will 
automatically be taken to the next screen.

Select 

Motorola HS820.

Select YES to bond.

Enter the passkey 0000 and select OK.

When your headset and phone are 

successfully paired, the blue light on your 

headset will change from steadly lit to 

flashing.

Release Tab Down