Hitachi travelstar hds723020bla642 用户手册
7K200 SATA OEM Specification
161/173
14.45 Write DMA FUA Ext (3Dh)
Command Block Output Registers
Command Block Input Registers
Register
7 6 5 4 3
2
1
0 Register
7
6 5 4 3 2
1
0
Data
Low
- - - - -
-
-
- Data
Low
-
- - - - -
-
-
Data
High
- - - - -
-
-
- Data
High
-
- - - - -
-
-
Current
- - - - -
-
-
- Error
...See
Below...
Feature
Previous - - - - -
-
-
-
Current
V V V V V V V V
HOB=0
-
- - - - -
-
-
Sector Count
Previous V V V V V V V V
Sector Count
HOB=1
-
- - - - -
-
-
Current
V V V V V V V V
HOB=0 V V V V V V V V
LBA Low
Previous V V V V V V V V
LBA Low
HOB=1 V V V V V V V V
Current
V V V V V V V V
HOB=0 V V V V V V V V
LBA Mid
Previous V V V V V V V V
LBA Mid
HOB=1 V V V V V V V V
Current
V V V V V V V V
HOB=0 V V V V V V V V
LBA High
Previous V V V V V V V V
LBA High
HOB=1 V V V V V V V V
Device
- 1 - - -
-
-
- Device
-
- - - - -
-
-
Command
0 0 1 1 1
1
0
1 Status
...See
Below...
Error Register
Status Register
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
CRC
UNC 0 IDN 0 ABT T0N AMN BSY
RDY DF
DSC
DRQ
COR IDX
ERR
V 0 0 V 0 V 0 0 0 V 0 V - 0 0 V
Table 129 Write DMA FUA Ext Command (3Dh)
The Write DMA FUA Ext command transfers one or more sectors of data from the host to the
device, then the data is written to the disk media. This command provides the same function
device, then the data is written to the disk media. This command provides the same function
as the Write DMA Ext command except that the transferred data shall be written to the media
before the ending status for this command is reported also when write caching is enabled.
The sectors of data are transferred through the Data Register 16 bits at a time.
The sectors of data are transferred through the Data Register 16 bits at a time.
The host initializes a slave-DMA channel prior to issuing the command. Data transfers are
qualified by DMARQ and are performed by the slave-DMA channel. The device issues only one
qualified by DMARQ and are performed by the slave-DMA channel. The device issues only one
interrupt per command to indicate that data transfer has terminated and status is available.
If an uncorrectable error occurs, the write will be terminated at the failing sector
Output Parameters To The Device
Sector Count Current
Sector Count Current
The number of continuous sectors to be transferred low order, bits (7:0).
Sector Count Previous
The number of continuous sectors to be transferred high order bits (15:8). If 0000h in
the Sector Count register is specified, then 65,536 sectors will be transferred.
the Sector Count register is specified, then 65,536 sectors will be transferred.
LBA Low Current
LBA (7:0).
LBA Low Previous
LBA (31:24).
LBA Mid Current
LBA (15:8).
LBA Mid Previous
LBA (39:32).
LBA High Current
LBA (23:16).
LBA High Previous
LBA (47:40).
Input Parameters From The Device
LBA Low (HOB=0)
LBA Low (HOB=0)
LBA (7:0) of the address of the first unrecoverable error.
LBA Low (HOB=1)
LBA (31:24) of the address of the first unrecoverable error.
LBA Mid (HOB=0)
LBA (15:8) of the address of the first unrecoverable error.
LBA Mid (HOB=1)
LBA (39:32) of the address of the first unrecoverable error.
LBA High (HOB=0)
LBA (23:16) of the address of the first unrecoverable error.
LBA High (HOB=1)
LBA (47:40) of the address of the first unrecoverable error.