Hitachi travelstar hds723020bla642 用户手册
7K200 SATA OEM Specification
162/173
14.46 Write FPDMA Queued (61h)
Command Block Output Registers
Command Block Input Registers
Register
7 6 5 4 3
2
1
0 Register
7
6 5 4 3 2
1
0
Data
Low
- - - - -
-
-
- Data
Low
-
- - - - -
-
-
Data
High
- - - - -
-
-
- Data
High
-
- - - - -
-
-
Current
V V V V V V V V Error
...See
Below...
Feature
Previous V V V V V V V V
Current
T T T T T
-
-
-
HOB=0
-
- - - - -
-
-
Sector Count
Previous P - - - -
-
-
-
Sector Count
HOB=1
-
- - - - -
-
-
Current
V V V V V V V V
HOB=0 V V V V V V V V
LBA Low
Previous V V V V V V V V
LBA Low
HOB=1 V V V V V V V V
Current
V V V V V V V V
HOB=0 V V V V V V V V
LBA Mid
Previous V V V V V V V V
LBA Mid
HOB=1 V V V V V V V V
Current
V V V V V V V V
HOB=0 V V V V V V V V
LBA High
Previous V V V V V V V V
LBA High
HOB=1 V V V V V V V V
Device
F 1 - - -
-
-
- Device
-
- - - - -
-
-
Command
0 1 1 0 0
0
0
1 Status
...See
Below...
Error Register
Status Register
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
CRC
UNC 0 IDN 0 ABT T0N AMN BSY
RDY DF
DSC
DRQ
COR IDX
ERR
V 0 0 V 0 V 0 0 0 V 0 V - 0 0 V
Table 130 Write FPDMA Queued Command (61h)
The Write FPDMA Queued command transfers one or more sectors of data from the host to the
device, then the data is written to the disk media.
device, then the data is written to the disk media.
If an uncorrectable error occurs, the write will be terminated at the failing sector
Output Parameters To The Device
Feature Current
Feature Current
The number of sectors to be transferred low order, bit (7:0)
Feature Previous
The number of sectors to be transferred high order, bit (15:8)
T
TAG value. It shall be assigned to be different from all other queued commands.
The value shall not exceed the maximum queue depth specified by the Word 75 of the
Identify Device information.
The value shall not exceed the maximum queue depth specified by the Word 75 of the
Identify Device information.
LBA Low Current
LBA (7:0).
LBA Low Previous
LBA (31:24).
LBA Mid Current
LBA (15:8).
LBA Mid Previous
LBA (39:32).
LBA High Current
LBA (23:16).
LBA High Previous
LBA (47:40).
F
FUA bit. When the FUA bit is set to 1, the completion status is indicated after the
transferred data are written to the media also when Write Cache is enabled. When the
FUA bit is set to 0, the completion status may be indicated before the transferred data
are written to the media successfully when Write Cache is enabled.
transferred data are written to the media also when Write Cache is enabled. When the
FUA bit is set to 0, the completion status may be indicated before the transferred data
are written to the media successfully when Write Cache is enabled.
P
Priority bit. When the Priority bit is set to 1, the device attempts to provide better
quality of service for the command than normal priority commands.
quality of service for the command than normal priority commands.
Input Parameters From The Device
LBA Low (HOB=0)
LBA Low (HOB=0)
LBA (7:0) of the address of the first unrecoverable error.
LBA Low (HOB=1)
LBA (31:24) of the address of the first unrecoverable error.
LBA Mid (HOB=0)
LBA (15:8) of the address of the first unrecoverable error.
LBA Mid (HOB=1)
LBA (39:32) of the address of the first unrecoverable error.
LBA High (HOB=0)
LBA (23:16) of the address of the first unrecoverable error.
LBA High (HOB=1)
LBA (47:40) of the address of the first unrecoverable error.