Hitachi travelstar hds723020bla642 用户手册
7K200 SATA OEM Specification
164/173
14.48 Write Multiple (C5h)
Command Block Output Registers
Command Block Input Registers
Register
7 6 5 4 3 2 1 0 Register
7 6 5 4 3 2 1 0
Data
- - - - -
-
-
- Data
- - - - - -
-
-
Feature
- - - - -
-
-
- Error
...See
Below...
Sector Count
V V V V V V V V Sector Count
V V V V V V V V
LBA Low
V V V V V V V V LBA Low
V V V V V V V V
LBA Mid
V V V V V V V V LBA Mid
V V V V V V V V
LBA High
V V V V V V V V LBA High
V V V V V V V V
Device -
L
-
- H H H H Device
- - - - H H H H
Command
1 1 0 0 0 1 0 1 Status
...See
Below...
Error Register
Status Register
7 6 5 4 3 2 1 0
7 6 5 4 3 2 1 0
CRC UNC 0
IDN
0 ABT T0N
AM
N
BSY RDY
DF DSC DRQ
COR IDX
ERR
0 0 0 V 0 V 0 0
0 V V V - 0 0 V
Table 132 Write Multiple Command (C5h)
The Write Multiple command transfers one or more sectors from the host to the device, then the
data is written to the disk media.
data is written to the disk media.
Command execution is identical to the Write Sectors command except that an interrupt is
generated for each block (as defined by the Set Multiple command) instead of for each sector.
The sectors are transferred through the Data Register 16 bits at a time.
The sectors are transferred through the Data Register 16 bits at a time.
Output Parameters To The Device
Sector Count
Sector Count
The number of continuous sectors to be transferred. If zero is specified, then 256 sectors
will be transferred.
will be transferred.
LBA Low
The sector number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 0 - 7. (L=1)
In LBA mode, this register contains LBA bits 0 - 7. (L=1)
LBA High/Mid
The cylinder number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 8 - 15 (Mid), 16 - 23 (High). (L=1)
In LBA mode, this register contains LBA bits 8 - 15 (Mid), 16 - 23 (High). (L=1)
H
The head number of the first sector to be transferred. (L=0)
In LBA mode, this register contains LBA bits 24 - 27. (L=1)
In LBA mode, this register contains LBA bits 24 - 27. (L=1)
Input Parameters From The Device
Sector Count
Sector Count
The number of requested sectors not transferred. This will be zero, unless an
unrecoverable error occurs.
unrecoverable error occurs.
LBA Low
The sector number of the last transferred sector. (L=0)
In LBA mode, this register contains current LBA bits 0 - 7. (L=1)
In LBA mode, this register contains current LBA bits 0 - 7. (L=1)
LBA High/Mid
The cylinder number of the last transferred sector. (L=0)
In LBA mode, this register contains current LBA bits 8 - 15 (Mid), 16 - 23 (High).
(L=1)
In LBA mode, this register contains current LBA bits 8 - 15 (Mid), 16 - 23 (High).
(L=1)
H
The head number of the last transferred sector. (L=0)
In LBA mode, this register contains current LBA bits 24 - 27. (L=1)
In LBA mode, this register contains current LBA bits 24 - 27. (L=1)