Hitachi travelstar hds723020bla642 用户手册

7K200 SATA OEM Specification 

 

39/

173

 

 

6.9  Safety 

6.9.1 

UL and CSA approval 

All models of the Travelstar 7K200 are qualified per UL60950-1:2003 

6.9.2 

IEC compliance 

All models of the Travelstar 7K200 comply with IEC 60950-1:2001. 

6.9.3 

German Safety Mark 

All models of the Travelstar 7K200 are approved by TUV on Test Requirement: EN 60950-1:2001, but the 
GS mark has not been obtained. 

6.9.4 

Flammability 

The printed circuit boards used in this product are made of material with a UL recognized 

flammability rating of V-1 or better. The flammability rating is marked or etched on the board. All 

other parts not considered electrical components are made of material with a UL recognized 
flammability rating of V-1 or better except minor mechanical parts. 

6.9.5 

Secondary circuit protection 

This product utilizes printed circuit wiring that must be protected against the possibility of 
sustained combustion due to circuit or component failures as defined in C-B 2-4700-034 (Protection 

Against Combustion). Adequate secondary over current protection is the responsibility of the using 

system. 

The user must protect the drive from its electrical short circuit problem. A 10 amp limit is required 

for safety purpose. 

6.10  Packaging 

Drives are packed in ESD protective bags and shipped in appropriate containers.   

6.11  Substance restriction requirements 

The product complies with the Directive 2002/95/EC of the European Parliament on the restrictions 

of the use of the certain hazardous substances in electrical and electronic equipment (RoHS).