Digitech gsp2101 用户手册
Another utility module is the Phase Inverter, which simply flips the phase of the signal (great for
eliminating acoustic guitar feedback). The last utlity type module in the Fx (MORE) Library is
is the Tuning Reference tone generator. This can be very useful when you need to get the whole
band in tune (should that be one of your goals). It can also be accessed anytime by simply press-
ing and holding the [TUNER] button.
eliminating acoustic guitar feedback). The last utlity type module in the Fx (MORE) Library is
is the Tuning Reference tone generator. This can be very useful when you need to get the whole
band in tune (should that be one of your goals). It can also be accessed anytime by simply press-
ing and holding the [TUNER] button.
Parameters are as follows:
Tremolos
Tremolo On / Off: Turns the Module on or off. When the Module is turned off, its
Parameters are not displayed, but signal will continue to pass through the module. To
see the Parameters, you must turn the Module on.
Parameters are not displayed, but signal will continue to pass through the module. To
see the Parameters, you must turn the Module on.
Tremolo Level: Controls the output level of the tremolo effect. Ranges from 0 to 100.
Tremolo Speed: Controls the tremolo speed (speed of modulation). Varies from 0.06 to
16.0 (Hz).
16.0 (Hz).
Tremolo Depth: Adjusts the intensity of the tremolo effect. Variable from 1 to 100.
Auto Panners
Auto Panner On / Off: Turns the Module on or off. When the Module is turned off, its
Parameters are not displayed, but signal will continue to pass through the module. To
see the Parameters, you must turn the Module on.
Parameters are not displayed, but signal will continue to pass through the module. To
see the Parameters, you must turn the Module on.
Panner Level: Controls the output level of the panning effect. Ranges from 0 to 100.
Panner Speed: Controls the panning speed (speed of modulation). Varies from 0.06 to
16 .0 (Hz).
16 .0 (Hz).
Panner Depth Adjusts the intensity of the panning effect. Variable from 1 to 100.
Phasers
Effect On / Off: Turns the Module on or off. When the Module is turned off, its
Parameters are not displayed, and signal will not continue to pass through the module.
To see the Parameters, you must turn the Module on.
Parameters are not displayed, and signal will not continue to pass through the module.
To see the Parameters, you must turn the Module on.
Phaser Level: Controls the overall level of the phaser. Variable from 0 to 100.
Delay Time: Sets the amount of delay present in each voice of multi-voice phasing
effects. Varies from 0 to 60 milliseconds.
effects. Varies from 0 to 60 milliseconds.
Regeneration: Controls the amount of phased sound fed back to the input of the
Module. High regeneration settings produce dramatic and interesting unnatural sounds.
Varies from -99% to +99%. This Parameter can also be turned off.
Module. High regeneration settings produce dramatic and interesting unnatural sounds.
Varies from -99% to +99%. This Parameter can also be turned off.
LFO Speed: Controls the speed of the phase sweep. Variable from 0.06 to 16.00 Hz.
LFO Depth: This Parameter sets the sweep depth (intensity) of the phaser. Variable
from 0.00 to 40.00 milliseconds.
from 0.00 to 40.00 milliseconds.
39
Section 3 - Editing Effects
GSP-2101 Artist Owner’s Manual
Editing Effects