Digitech gsp2101 用户手册

Phase Inverter Flips the signal phase 180 degrees. Settings are either IN PHASE or

OUT OF PHASE.

Level: Controls the output level of the tuning reference tone. Variable from 0 to 100.

Reference: Selects the reference tone. This Parameter has settings for standard guitar
tuning, standard guitar tuning  harmonics (12th fret), E flat guitar tuning tones and
12th fret harmonics, 437-443 Hz tones, and a 1kHz reference tone. Note: This module is
always available by pressing and holding the [TUNER] button.

When you Link your custom Algorithms together, the GSP-2101 Artist will allow a single out-
put to be routed to any number of inputs. The reverse, however, is not true. If you want more
than one output routed to a single input, you must use a mixer, just like you would if you were
using discrete effects devices. The GSP-2101 Artist provides a wide range of mixer Modules to
accommodate virtually any routing application. 

Each mixer channel is equipped with an input level and an output level (except 3-out mixers) to
give maximum control over levels coming and going to and from different Modules. Mixer
Modules are available in 1-out, 2-out, and 3-out configurations. 2-out configurations include pan
controls on the inputs, and 3-out mixers have a stereo output pair (outputs 2 and 3) plus a mono
summed output (output 1) that carries a summed version of the signal at outputs 2 and 3.

Why Do You Need Mixers? The role of mixers in effects chains is probably the most misunder-
stood and least appreciated. They quietly go about their job without hype or fanfare, and
although you may not know it, most multi-effects chains, from the most sophisticated rack units
to the simplest stomp boxes, depend on mixers for proper signal handling. 

41

Section 3 - Editing Effects

GSP-2101 Artist Owner’s Manual

Editing Effects