Digitech gsp2101 用户手册

The MIDI merging option allows incoming MIDI data to be merged with any MIDI data gener-
ated by the GSP-2101 Artist before being sent to the MIDI Out port.

To change the setting of the MIDI merging option, do the following:

• After entering the MIDI setup menu, press the [NEXT] key four times. The display

reads:

• To change the MIDI merging setting, press  Function key [1]. When you’re finished,

press the [MIDI] button once to exit.

The GSP-2101 Artist works hard at making Program load times as small as possible. One of the
ways it does this, is by caching the Programs before they are actually needed. When the Control
One foot controller is connected, it caches according to Banks. Otherwise it pre-loads Programs
closest to the currently loaded Program.

Using MIDI Program changes can can be troublesome in this regard because unlike the Control
One, MIDI isn’t thinking in Banks. Using Program 6, then 7, then jumping to 20 can deliver
slightly different load times. This can be inconvenient if you are counting on a Sequencer to
change Programs for you at an exact instant.

We give two options to help in these situations: NORMAL MIDI Program Load and FAST
MIDI Program Load. The NORMAL setting disregards the caching completely (and ensures
consistent load times) while the FAST setting tries its best to cache Programs.

To change the setting of the MIDI Program Load option, do the following:

• After entering the MIDI setup menu, press the [NEXT] key six times. The display

reads:

• To change the MIDI Program Load setting, press  Function key [1]. When you’re fin-

ished, press the [MIDI] button once to exit.

¡NORMAL MIDI Program

Load

¡MIDI merging    Off
™Send Front Panel

program change? No

≤                  ≥ 

69

Section 5 - The GSP-2101 and MIDI

GSP-2101 Artist Owner’s Manual

2101 & MIDI