Digitech gsp2101 用户手册
C
ONFIGURING THE
P
EDALBOARD
The optional Control One foot controller can help you get the most out of your GSP-2101
Artist. Since the Control One talks to the 2101 using a proprietary communication protocol, it
offers better response time and capabilities not available with convention MIDI pedalboard con-
trollers.
Artist. Since the Control One talks to the 2101 using a proprietary communication protocol, it
offers better response time and capabilities not available with convention MIDI pedalboard con-
trollers.
The Control One includes 12 footswitches for Program and Parameter control. It also features a
built-in Expression Pedal. An external expression pedal jack allows you to add a second passive
volume pedal for even more real-time control of your sound. The large 20 character display con-
stantly feeds you important information like Program names or Tuner indicators.
built-in Expression Pedal. An external expression pedal jack allows you to add a second passive
volume pedal for even more real-time control of your sound. The large 20 character display con-
stantly feeds you important information like Program names or Tuner indicators.
Fig 5-1
The Control One uses a standard 5-pin DIN cable (like those used for MIDI) to communicate
with the 2101. Simply connect the Control One output jack to the GSP-2101 Artist Foot
Controller input jack and your ready to roll!
with the 2101. Simply connect the Control One output jack to the GSP-2101 Artist Foot
Controller input jack and your ready to roll!
NOTE: Never plug anything other than a Control One into the 2101’s Foot Controller input
jack. (Voltage is present at this jack).
If you choose to use a second expression pedal with the Control One foot controller, simply plug
a cable from the pedal’s output to the Control One’s Ext pedal input. Voltage Control pedals
(such as the DOD FX-17) can also be used with the Control One. You will need to connect the
Control One to the CV Out of the expression pedal instead of the audio output. Once you are
are connected, you need to calibrate the pedal (see below).
a cable from the pedal’s output to the Control One’s Ext pedal input. Voltage Control pedals
(such as the DOD FX-17) can also be used with the Control One. You will need to connect the
Control One to the CV Out of the expression pedal instead of the audio output. Once you are
are connected, you need to calibrate the pedal (see below).
Pedal Calibration: Calibration procedures are the same for both the internal (built-in) Control
One expression pedal and external pedals that can be connected to the Control One. They are
as follows:
One expression pedal and external pedals that can be connected to the Control One. They are
as follows:
• Press the [UTILITY] key once. The display reads:
¡Output Mode: Stereo
™Foot Controller
™Foot Controller
≥
70
Section 6 - The GSP-2101 and the Control One
GSP-2101 Artist Owner’s Manual
2101 & C1