bobcat 2200d 用户手册
Bobcat 2200 Diesel Vehicle
3
Operation & Maintenance Manual
GENERAL INFORMATION
This manual is designed to include information on both
the diesel Bobcat 2200 vehicles. Both are key-start
vehicles. The vehicles start and operate similar to an
automobile. Each has a feature that allows the engine to
run at idle or advanced RPM using the accelerator pedal
when the Forward/Reverse handle is in the NEUTRAL
position.
the diesel Bobcat 2200 vehicles. Both are key-start
vehicles. The vehicles start and operate similar to an
automobile. Each has a feature that allows the engine to
run at idle or advanced RPM using the accelerator pedal
when the Forward/Reverse handle is in the NEUTRAL
position.
All operating procedures, maintenance, and regular
servicing are identical to both vehicles unless otherwise
noted. If any of these differ between vehicles, it will be
noted for that specific procedure.
servicing are identical to both vehicles unless otherwise
noted. If any of these differ between vehicles, it will be
noted for that specific procedure.
This homologated diesel vehicle is designed for operation
on public roads. Its construction also allows for operation
on rough terrain on inclines not exceeding 20%.
Throughout this supplement, important features
particular to the homologated vehicle are highlighted.
on public roads. Its construction also allows for operation
on rough terrain on inclines not exceeding 20%.
Throughout this supplement, important features
particular to the homologated vehicle are highlighted.
MODEL IDENTIFICATION
The serial number of each Bobcat vehicle is printed on a
bar code decal mounted on the frame behind and to left
of brake pedal (Example: 23521101) [Figure 1]. See
following NOTE.
bar code decal mounted on the frame behind and to left
of brake pedal (Example: 23521101) [Figure 1]. See
following NOTE.
NOTE: Have the Bobcat serial number available when
ordering parts or making inquiries.
Figure 1
Serial Number
CONTROLS AND INDICATORS
See GENERAL WARNINGS on page 7.
WARNING
•
Before allowing anyone to drive the vehicle, make
sure the driver is familiar with all controls and
operating procedures.
sure the driver is familiar with all controls and
operating procedures.
•
Do not tamper with the high idle speed setting on
the diesel vehicle. Doing so will void the
warranty, as well as damage the engine and other
components, and could result in property
damage, personal injury, or death due to unsafe
speeds.
the diesel vehicle. Doing so will void the
warranty, as well as damage the engine and other
components, and could result in property
damage, personal injury, or death due to unsafe
speeds.
•
Do not shift the Forward/Reverse handle while
the vehicle is in motion.
the vehicle is in motion.
•
Engine must be at idle before shifting the
Forward/Reverse handle. Failure to do so may
result in injury to inattentive passengers and (or)
damage to the vehicle.
Forward/Reverse handle. Failure to do so may
result in injury to inattentive passengers and (or)
damage to the vehicle.
•
To avoid unintentionally starting or rolling the
vehicle, set the park brake, place the Forward/
Reverse handle in the NEUTRAL position, turn
the key switch to the OFF position, and remove
the key when leaving the vehicle.
vehicle, set the park brake, place the Forward/
Reverse handle in the NEUTRAL position, turn
the key switch to the OFF position, and remove
the key when leaving the vehicle.
Key Switch
The key switch (2) is mounted on the instrument panel to
the right of the steering column [Figure 2]. It has four
positions: PREHEAT, OFF, ON, and START. To preheat
glow plugs in cold weather, turn the key to the PREHEAT
position and hold for 10-15 seconds. Then turn the key all
the way to the START position and hold until the engine
starts. If the engine does not start after 10-15 seconds,
return the key to the OFF position and repeat the
procedure. Once the engine starts, release the key and it
will return to the ON position. The engine will idle in
neutral. The engine will continue to idle until the key is
turned to the OFF position. See following WARNING,
CAUTION and NOTE.
Turn the key to PREHEAT position if the temperature falls
below –5 °C (23 °F). Do not hold the key in the PREHEAT
position longer than 20 seconds.
the right of the steering column [Figure 2]. It has four
positions: PREHEAT, OFF, ON, and START. To preheat
glow plugs in cold weather, turn the key to the PREHEAT
position and hold for 10-15 seconds. Then turn the key all
the way to the START position and hold until the engine
starts. If the engine does not start after 10-15 seconds,
return the key to the OFF position and repeat the
procedure. Once the engine starts, release the key and it
will return to the ON position. The engine will idle in
neutral. The engine will continue to idle until the key is
turned to the OFF position. See following WARNING,
CAUTION and NOTE.
Turn the key to PREHEAT position if the temperature falls
below –5 °C (23 °F). Do not hold the key in the PREHEAT
position longer than 20 seconds.
WARNING
•
Moving parts! Keep clear of the engine
compartment while the engine is running.
compartment while the engine is running.
235211001
220
0