Korg triton-rack 信息指南

This knob adjusts the input level of the AUDIO 
INPUT 1 and 2 jacks.

This knob adjusts the volume of the AUDIO OUT-
PUT (MAIN) L/MONO and R jacks, as well as the 
headphone jack.

A set of headphones (standard 1/4" stereo phone 
plug) can be connected here (

The output from the AUDIO OUTPUT (MAIN) L/
MONO and R jacks can be monitored in stereo 
through the headphones.

The TRITON-Rack includes a 3.5 inch disk drive, 
capable of  reading both 2DD (double-side double-
density) and 2HD (double-side high density) 
floppy disks. Edited data can be saved on a floppy 
disk, and the factory preset data, SMF data, or 
multisampling/sampling data etc. can be loaded 
from a floppy disk.
For details on handling floppy disks, refer to “Cau-
tions when handling floppy disks” (

Eject button
To remove a floppy disk, first make sure that the 
disk access indicator

 is dark, and then press this 

button. If the disk does not eject when you press 
this button, do not attempt to remove the disk by 
force. Please contact your dealer.

Use the [SELECT] key to select realtime controller 
mode A/B/C, and use knobs [1]–[4] to control the 
tone, effects, MIDI control changes, and arpeggia-
tor etc. while you perform. (

[1] LPF CUTOFF:
Controls the cutoff frequency of the low pass filter.

[2] RESONANCE/HPF:
Controls the filter resonance level or the high pass 
filter cutoff frequency.

[3] EG-INTENSITY:
Controls the filter EG intensity.

[4] EG-RELEASE:
Controls the filter/amp release time.

Controls the functions that are assigned in each 
mode (Program, Combination, Multi, or Sam-
pling).

Disk access
indicator

Eject button