Korg triton-rack 信息指南

The TRITON-Rack has numerous functions: playing 
and editing programs, combinations, or multis; record-
ing and playing pattern data; recording samples; and 
managing disk data. The largest unit used to organize 
these functions is called a mode. The TRITON-Rack 
has six modes.

• Select and play programs
• Edit a program

Make settings for the oscillator, filter, amp, EG, LFO, 
effects, and arpeggiator.

• The Audition function can be used.

• Select and play combinations
• Edit a combination

Make settings for volume, pan, layer/split etc. for 
each timbre (program), and make settings for effects 
and the two arpeggiators etc.

• The TRITON-Rack will function as a 16-track multi-

timbral tone generator.

• For each of the 16 tracks, you can select a program, 

and make level, pan, and effect settings.

• Up to 200 multis can be used, with 150 preset 

patterns shared by all multis, and 100 user patterns 
for each multi.

• Your playing can be recorded in a user pattern. 

The performance generated by the arpeggiator can 
also be recorded.

• You can play and make settings for the RPPR 

(Realtime Pattern Play/Recording) function. Song 
data included with the EXB-PCM03 etc. that uses 
RPPR can also be played.

• Sample sounds from an external audio device or 

mic connected to the rear panel AUDIO INPUT 
jacks. Insert effects can be applied to the external 
input sound while you sample.

• Edit the waveform data you sampled or waveform 

data that you loaded in Disk mode, and set loop 
points etc.

• Edit multisamples consisting of two or more 

samples.

• A multisample can be converted into a program, so 

that a multisample created in Sampling mode can 
be used in Program, Combination, or Multi modes.

• Make settings that affect the entire TRITON-Rack, 

such as master tune and global MIDI channel.

• Create drum kits (144 kits), arpeggio user patterns 

(328 patterns), and user scales (16 one-octave scales 
and 1 all-note scale).

• Create drum kits using the 413 internal 

drumsamples (ROM). You can also use 
drumsamples from an optional EXB-PCM series 
board (if installed), or samples (RAM) that you 
created in Sampling mode.

• Adjust the input level etc. from the AUDIO INPUT 

1 and 2. These settings are valid in modes other 
than Sampling mode. The TRITON-Rack’s effects 
can be applied to the external input sound. (The 
settings for Sampling mode are made 
independently within Sampling mode.)

• Transmit data dumps of MIDI exclusive data.

• Data of each mode can be saved and loaded using 

the floppy disk drive or an external SCSI device 
(when the separately sold EXB-SCSI option is 
installed).

• Media such as floppy disks or hard disks (when 

the separately sold EXB-SCSI option is installed) 
can be formatted, and data can be managed by 
copying etc.

• Korg format sample data can be loaded and saved. 

AKAI, AIFF, and WAVE format sample data can 
be loaded. Sample data can be saved in Korg 
format, or exported as AIFF or WAVE data.

• Songs that you created in Multi mode can be saved 

in SMF format. SMF files can be loaded as Multi 
mode patterns.

• You can use the Data Filer function (to save/load 

MIDI exclusive data).