Hoyt 2002 compound bow 用户手册
NOCK SET INSTALLATION
A nock point is a reference on the string that
marks the exact location for you to nock your
arrow. The arrow’s nock is positioned under the
nock set. To install the nock set at the proper
position begin by slipping the nock set on the
string. Then, using your rest as a reference, posi-
tion the nock set just above level. A finger shoot-
er should initially position the nock set at
approximately 3/8” above level. The release
shooter should begin at approximately 1/4”
above level. (See fig 4) Once the nock set is at the
desired location use a special set of nocking pli-
ers to crimp the nock set into place. NEVER
shoot a bow without a nock set or with a nock set
that has not been properly crimped. For proper
installation Hoyt USA recommends that this be
done by a qualified Pro Shop.
A nock point is a reference on the string that
marks the exact location for you to nock your
arrow. The arrow’s nock is positioned under the
nock set. To install the nock set at the proper
position begin by slipping the nock set on the
string. Then, using your rest as a reference, posi-
tion the nock set just above level. A finger shoot-
er should initially position the nock set at
approximately 3/8” above level. The release
shooter should begin at approximately 1/4”
above level. (See fig 4) Once the nock set is at the
desired location use a special set of nocking pli-
ers to crimp the nock set into place. NEVER
shoot a bow without a nock set or with a nock set
that has not been properly crimped. For proper
installation Hoyt USA recommends that this be
done by a qualified Pro Shop.
fig 4
CABLE GUARD INSTALLATION
All aluminum Hoyt USA bows are designed
with a built in cable guard bar attachment. To
All aluminum Hoyt USA bows are designed
with a built in cable guard bar attachment. To
10