Hoyt 2002 compound bow 用户手册
12
causing the cable to track off the cam. This can
cause damage to the bow or personal injury. To
prevent this from happening, NEVER SET THE
BAR AT THE THREE O’ CLOCK POSITION.
cause damage to the bow or personal injury. To
prevent this from happening, NEVER SET THE
BAR AT THE THREE O’ CLOCK POSITION.
CABLE GUARD GLIDE INSTALLATION
Hoyt USA uses a specially designed cable glide
that has off-set cable slots. To correctly install
the glide on two-cam, VersaCam, and Redline
Cam model bows, make sure that when the
cables are inserted into the glide the shortest slot
is to the rear and the longer slot closest to the
grip. For all SaberCam model bows, make sure
that the longest slot is to the rear and the shorter
slot is closest to the grip. (See fig 7)
Hoyt USA uses a specially designed cable glide
that has off-set cable slots. To correctly install
the glide on two-cam, VersaCam, and Redline
Cam model bows, make sure that when the
cables are inserted into the glide the shortest slot
is to the rear and the longer slot closest to the
grip. For all SaberCam model bows, make sure
that the longest slot is to the rear and the shorter
slot is closest to the grip. (See fig 7)
fig. 7
Note: If you have trouble pulling the cables back
far enough to get the glide over the end of the
cable guard bar, you will need to use a bow
press. Hoyt USA recommends that the cable
far enough to get the glide over the end of the
cable guard bar, you will need to use a bow
press. Hoyt USA recommends that the cable
SaberCam
Glide Position
Glide Position