Konica Minolta 7013 psc 用户手册
NetWare Configuration-1
4
NetWare Configuration
Use this chapter if you will be printing from a Novell NetWare NOS. This chapter is
divided into the following sections:
divided into the following sections:
•
Configuring NetWare 3.1x
describes how to configure the Print Server Card for
use with Version 3.1x. Use PCONSOLE to set up the print server function.
•
Configuring NetWare 4.0x in Bindery Emulation
describes how to configure the
Print Server Card for use with Version 4.x Bindery Services. Use PCONSOLE to
set up the print server function.
set up the print server function.
•
Configuring NetWare Directory Services
describes how to configure the Print
Server Card for use with Version 4.x Directory Services. Use NWADMIN to set up
the print server function.
the print server function.
•
Print Server Card Setup Parameters
describes the parameters accessible via MAP
or an IP Browser used to configure the Print Server for NetWare.
•
Using NetWare Utilities
explains how to use standard Novell NetWare utilities to
make changes to the configuration of the Print Server function.
4.1 Configuring NetWare 3.x
Before configuring NetWare, you must determine if the Print Server Card has its
desired name. You may use MAP or an IP Browser.
desired name. You may use MAP or an IP Browser.
The following steps are the general procedure for configuring the Print Server Card.
You must have supervisor privileges to do this configuration. These steps are covered
in detail in the following paragraphs:
You must have supervisor privileges to do this configuration. These steps are covered
in detail in the following paragraphs:
1. Start PCONSOLE and select the file server you want to use.
2. Create the print queues.
3. Specify the <
print server
> card as a print server.
4. Configure the print server and printer.
5. Assign the print queues.
6. Set up the NOTIFY options.
7. Repeat the procedure for other file servers.