Konica Minolta 7013 psc 用户手册

 

NetWare Configuration-2

 

When you are finished, turn the printer off and on again.  The printer creates a status 
report that indicates the file servers to which the unit is attached and the queues which 
it services.

Before you begin:

•  Verify that you have supervisor privileges on the file servers on which the Print 

Server Card print server is to be entered.

•  Verify that your version of PCONSOLE is later than 1.0.

 

Follow these steps to start PCONSOLE: 

1. Log in to the network, type 

 

 and press the return key.

2. Choose Change Current File Server from the Available Options menu. A list of 

file servers is displayed.

3. Select the file server on which you want to install the print server and press the 

return key. If the name of the file server you want is not displayed, press the h key 

to get a list of file servers. 

4. Log in to the file server.

5. Press the UP key to return to the Available Options menu.

The print server must be assigned to at least one print queue on the file server.

•   If the print queue that you want the <print server> card to service already exists, and 

you know the name of this queue, go to 4.1.3 Enter the Print Server Name.  

•  If you do not know the name of the queue, or it does not exist, use the following pro-

cedure:

1. Choose Print Queue Information from the Available Options menu, and press 

the return key. A list of existing queues is displayed.

2. To create a new queue, press INSERT. Enter the name of the queue and press the 

return key. You do not need to enter any more information at this time.

3. Press the ESC key to return to the Available Options menu.