Konica Minolta 7013 psc 用户手册
AppleTalk Configuration-4
6.3
Configuring the Print Server Card
You use the options added to the menu bar to configure the print server. Depending on
your printer, certain operations may not be available. These functions will be grayed
out and cannot be selected.
your printer, certain operations may not be available. These functions will be grayed
out and cannot be selected.
6.3.1 Configuration
Use the Configuration function to change the names of the device and AppleTalk
Zone. These changes are stored only in the print server and are not passed on to the
PostScript interpreter. When you choose this function, the following screen is dis-
played:
Zone. These changes are stored only in the print server and are not passed on to the
PostScript interpreter. When you choose this function, the following screen is dis-
played:
1. To change the print server device name, click on the name displayed and then
enter the new name. Be careful when you do this. Many printers maintain the
printer name in the printer controller where it can be changed using a Macintosh
utility. If you change the name in the Print Server Card, you may make the net-
work interface and the printer become "out of sync".
printer name in the printer controller where it can be changed using a Macintosh
utility. If you change the name in the Print Server Card, you may make the net-
work interface and the printer become "out of sync".
2. To change the AppleTalk Zone, click on the zone displayed. A menu displays all
available zones.
3. Select the new zone from the menu.
4. Click on OK when you have finished viewing this screen or when you are done
making changes.
5. Turn off the printer and then turn it on again to make the changes take effect. The
status sheet should identify the new printer name and the new zone preference.