Konica Minolta 7013 psc 用户手册

AppleTalk Configuration-5

The Error Log function is used to view a log of events that the Print Server Card has 
registered. The log contains information as well as errors. Customer Support may 
need the information on this screen if your Print Server Card encounters problems.

When you choose this function, a screen containing the text of the log is displayed.  
You can print the error log contents by using the Print option under the File menu. To 
save the contents of the error log, do one of the following:

•  Use the Save As option from the File menu to save the entire log file.

•  Use the Edit option to cut, copy, and paste some or all of the log file.

Note:

This does not enter data into the error log itself. The data is cleared each time the 

printer is power cycled.

Use the Protocol Setup option to configure network protocols other than AppleTalk.  
When you select the Protocol Setup function, the following screen is displayed:

Note:  The default values for  the IP address and Subnet Mask are shown as zeros. How-

ever, this represents a "no IP address" condition, not an IP address.

1. Click the protocols to On if you want them to be active.  Click those protocols that 

you do not want to use to Off.  The utility will not let you make active any proto-
col that the Print Server Card does not support or cannot handle because of active 
protocol limitations. 

2. Enter the IP address and subnet mask if you have enabled TCP/IP.  Enter the 

default gateway address, if you have one.