Konica Minolta kn303ev2 用户手册
Chapter 3 Windows 95/98 Configuration (Peer-to-Peer Printing)
3-4 Konica Network Interface Card INSTRUCTION MANUAL
2.
Click [Printers...] button to display the [Printers] dialog box. Set up the network interface card
to print by using the IP Peer-to-Peer. You can search the list available network interface card
and manually add or remove network interface cards to the Windows Port Listing.
The following options are available on this screen:
OK:
Accepts all changes made to setup and exits to the previous screen.
Cancel:
Discards any changes made to setup and exits to the previous screen.
Add:
Allows a user to manually add a printer to the [Available Printers] list by inputting the information in the
fields to the left of the buttons. By Adding a printer to the list in this manner, the user bypasses the
[Search] function. The port is not checked to see if it is actually available on the network.
• IP Address:
Enter the IP address of the printer you wish to add to the list manually.
• Name:
Enter the name you wish the printer to be listed by in the [Unit Name] field.
• Port:
Enter the actual port for communicating with the printer. This defaults to 10001.
• Description:
Enter the description you wish listed in the [Description] field for the printer.
Delete:
Deletes the highlighted printer(s) from the [Available Printers] list below. Printers deleted in this fash-
ion will no longer be listed in the [PORT] listing when adding a printer. However, This does not actually
delete the printer from the network, it only removes it from the list maintained on this computer.
The printer may be re-added to the list by selecting the [Find Printers] button (described below) as
long as it remains connected to the network.
Find Printers:
Initiates a search routine out to the network. This routine will then list all printers found on the network
by the method defined in the previous setup screen. The default method for displaying the list of
printers is by IP Address.