Konica Minolta kn303ev2 用户手册

Konica Network Interface Card INSTRUCTION MANUAL  3-5

Clear:

Clears the [Available Printers] list below. This will not clear any printer marked with the [Permanent]

flag.

Select:

Flags the highlighted printer(s) with the [S] flag. Only 30 printers may be selected at one time. When

displaying the [PORT] list during the process of adding or changing a printer, only Selected printers

will be displayed.

Permanent:

Flags the highlighted printer(s) with the [P] flag. Any printer marked with this flag will not be removed

from the [Available Printers] list, even if the printer is physically removed from the network or the [Clear

List] button is selected (described above)

Available Printers:

List of printers that was detected on the network. This list can be cleared using the [Clear List] button

(described above) and this list can be updated or refilled using the [Find Printers] button (described

above). Printers in this list are described with three fields:

• Unit Name:

Printer Name method defined in the previous screen. The default Printer Name method is by IP ad-

dress. Printers may also be displayed by the NIC Serial Number, by the DNS Name of the printer, or by

the Unit Name. The Unit Name is the [Print Server Name] defined in the NIC.

• Unit IP:

Actual IP address of the unit. This is displayed regardless of which Unit Name method is selected.

• Port Number:

Currently you do not need to type anything in this field.

• Description:

Printer's description. This field usually contains the manufacturer's name and the printer's model.

• Flags:

[S], selected or [P], permanent. Any printers marked with an [S] flag will be displayed in the Window’s

Port Listing. When displaying the Windows port list during the process of adding or changing a printer,

only Selected printers will be displayed. Only 30 printers may be selected at one time.

Any printer marked with a [P] flag will not be removed from the [Available Printers] list, even if the

printer is physically removed from the network or the [Clear List] button is selected.

●

When all settings are completed, install the printer driver. In case of using the IP Peer-to-Peer, specify the

connection type as [Local], and the printer name set in the IP-Peer-to-Peer to the  [Printer Port].

For more information on installation and setting of the printer driver, refer to the Konica INSTRUCTION

MANUAL designed for your specific print controller model.