Nortel Networks 5399 用户手册
Nortel Networks 5399 Access Switch Hardware Installation Guide
Chapter 2
Installing the Model 5399 Remote Access Concentrator Module
2-2
•
An appropriate subnet mask
•
A host with Model 5399 software installed (if not booting
from FLASH memory)
from FLASH memory)
The Model 5399 can receive its operational image from any one of these
sources:
sources:
•
A UNIX host running erpcd
•
FLASH memory (self boot)
•
Another Model 5399 configured as a boot host
•
Any host supporting TFTP
•
A Windows NT host running erpcd
outlines the different configurations the Model 5399 supports.
Table 2-1. Model 5399 Configuration Options
The Remote Access Concentrator supports Windows NT
®
host
tools. Remote Annex Server Tools for Windows NT
®
allows
you to boot and configure the Remote Access Concentrator on a
Windows NT
Windows NT
®
network.
Device on which the
Operational Software and
Image is installed
Operational Software and
Image is installed
Model 5399 Must
Be Connected to
the Network
Be Connected to
the Network
Input Device used to
Enter Basic
Configuration
Parameter Values
Enter Basic
Configuration
Parameter Values
UNIX Load Host
Yes
Service Port Terminal
Another Model 5399
configured as a load server
configured as a load server
Yes
Service Port Terminal
Self-boot (from the image
contained in Flash memory)
contained in Flash memory)
No
Service Port Terminal
Windows NT
®
host
Yes
Service Port Terminal