National Instruments pci-6110e-6111e 用户手册

Chapter 2

Installation and Configuration

2-2

 National Instruments Corporation

5.

Insert the 611X E board into a 5 V PCI slot. Gently rock the board 
to ease it into place. It may be a tight fit, but do not force the board 
into place. 

6.

If required, screw the mounting bracket of the 611X E board to the 
back panel rail of the computer.

7.

Replace the cover.

8.

Plug in and turn on your computer.

The 611X E board is installed. You are now ready to configure your 
software. Refer to your software documentation for configuration 
instructions.

Due to the National Instruments standard architecture for data 
acquisition and the PCI bus specification, the 611X E board 
is completely software configurable. You must perform two types 
of configuration on the 611X E board—bus-related and data 
acquisition-related configuration.

The 611X E board is fully compatible with the industry standard 
PCI Local Bus Specification Revision 2.0. This allows the PCI system to 
automatically perform all bus-related configurations and requires no 
user interaction. Bus-related configuration includes setting the board 
base memory address and interrupt channel. 

Data acquisition-related configuration includes such settings as analog 
input coupling and range, and others. You can modify these settings 
using NI-DAQ or application level software, such as ComponentWorks, 
LabVIEW, LabWindows/CVI, and VirtualBench.

PCI_E.book  Page 2  Thursday, June 25, 1998  12:55 PM