Daewoo dwd-e1211w's 用户手册

25

Put the laundry into the Drum and close the Door.

Press the Power button.
• The LED shows only '- --' signal.

Select the 'DRY CONDITION' you want by pressing 'DRY' button.
As this button is pressed, the dry condition is selected by 'Cupboard' 

→

'Very' 

→

'Time(30, 1:00, 1:30)' 

→

OFF 

→ 

'Low Temp' 

→

'Iron' 

→

'Cupboard'

Press the 'Start/Pause' button.
• The washer will be operated with locking Door.

1

2

3

4

• Do not use the detergent and softener.
• Cold water tap should be opened.
• After finishing this program,

is showed on PCB board alternately and the smoothing creases

program is conducted during 30 minute and then power is OFF.

• 'WOOL' and 'DELICATE' and 'BLANKET' program are not select 'DRY'.
• Be careful the high temperature of laundry when put out clothes.
• A little shrikage and deformation will be possibly happened after drying, so check clothes whether dry or not

previously

• If the dry performance is poor, change the selecting temperature.
• If youn want to dry with wash, after selecting program, press the 'DRY' button then press 'Start/Pause'

button.