Crestron st-btp 用户手册

Rechargeable Power Pack 

Crestron ST-BTP

The Crestron high performance rechargeable power pack, herein referred 
to as the ST-BTP, is designed to supply power to certain Crestron 
wireless touchpanel models. Installation of the ST-BTP offers the 
touchpanel user the freedom to roam without being confined to a 
stationary power source (i.e., external power pack or docking station).  
The table below provides a summary of leading specifications for the  
ST-BTP. Weight is rounded to the nearest hundredth unit.  

Operating Output Voltage

4.8 VDC, nominal

Composition

Nickel-Cadmium (NiCad) Cells

Estimated Length of Charge 

Up to 3 hours of continual use (depends

Cycle (new unit with full charge) on touchpanel configuration settings)
Estimated Life

Up to 300 to 1000 charge/discharge cycles
or three to five years of standby power

Optimal Operating, Storage, &

Approximately 68

o 

to 86

o

F (20

o 

to 30

o

C)

Charge/Discharge Temperature
Weight

0.79 lb (0.36 kg)

 

As of the date of manufacture, the ST-BTP has been tested and found to 
comply with specifications for CE marking. 

 

NOTE:  Due to memory effect of NiCad cells, Crestron recommends that 
the ST-BTP be fully discharged for every 25 charge/discharge cycles. 
The ST-BTP can be fully discharged while in the touchpanel (with 
reserved join number 1036). Refer to "Fully Discharging the ST-BTP" on 
page 5 for details. 

WARNING:  The rechargeable power pack contains toxic material 
(cadmium), therefore do not incinerate or mutilate. In the event that the 
battery electrolyte gets on skin or in eyes immediately flush with pure 
water and consult a doctor.   

•  High Performance Rechargeable Power Pack: ST-BTP