Crestron st-btp 用户手册
Crestron ST-BTP
Rechargeable Power Pack
NOTE: The ST-BTP contains a NiCad battery. When the unit can no
longer retain a charge, it must be recycled or disposed of properly. Refer
to the recycle label on the unit for disposal information.
longer retain a charge, it must be recycled or disposed of properly. Refer
to the recycle label on the unit for disposal information.
To prevent short-circuiting, use care when handling the ST-BTP. NiCad
cells have extremely low internal resistance and discharge at high current
levels when shorted. As a result, the high temperatures can damage the
rechargeable power pack and may cause personal injury. Avoid
accidental shorting from uninsulated workbenches, tools, bracelets, rings,
and coins.
cells have extremely low internal resistance and discharge at high current
levels when shorted. As a result, the high temperatures can damage the
rechargeable power pack and may cause personal injury. Avoid
accidental shorting from uninsulated workbenches, tools, bracelets, rings,
and coins.
Storage
The ST-BTP can be stored in a temperate dry place (removed from the
touchpanel and docking station) indefinitely without significant
irreversible degradation in its performance. The self-discharge rate is a
function of temperature and internal resistance. High temperature storage
reduces charge retention. Best results occur if the ST-BTP is stored at an
average temperature of 68
touchpanel and docking station) indefinitely without significant
irreversible degradation in its performance. The self-discharge rate is a
function of temperature and internal resistance. High temperature storage
reduces charge retention. Best results occur if the ST-BTP is stored at an
average temperature of 68
° to 86°F (20° to 30°C). After an extended
storage, initiate a few charge/discharge cycles to restore full capacity.
Recharge the ST-BTP prior to use.
Recharge the ST-BTP prior to use.
Installation
The unique design of the ST-BTP prevents it from being installed
improperly. The rechargeable power pack only fits one way into the
battery compartment of the touchpanel.
The ST-BTP can be installed into a number of Crestron wireless
touchpanel models. The ST-1550C and its related family members (i.e.,
STX-1550C & STX-1550CW) are the most common models. These
models have a similar overall shape and battery compartment location.
Therefore, the illustration on the next page shows the ST-BTP properly
seated in the ST-1550C, as an example. Complete the following steps to
install.
improperly. The rechargeable power pack only fits one way into the
battery compartment of the touchpanel.
The ST-BTP can be installed into a number of Crestron wireless
touchpanel models. The ST-1550C and its related family members (i.e.,
STX-1550C & STX-1550CW) are the most common models. These
models have a similar overall shape and battery compartment location.
Therefore, the illustration on the next page shows the ST-BTP properly
seated in the ST-1550C, as an example. Complete the following steps to
install.
Operations Guide - DOC. 5746A
High Performance Rechargeable Power Pack: ST-BTP
• 3