brocade-communications-sy rfs6000 用户手册
Brocade Mobility RFS4000, RFS6000 and RFS7000 CLI Reference Guide
155
53-1001931-01
Chapter
3
User Exec Commands
In this chapter
•
Logging in to the controller places you within the USER EXEC command mode. Typically, a login
requires a user name and password. You have three login attempts before a connection attempt is
refused. USER EXEC commands (available at the user level) are a subset of the commands
available at the privileged level. In general, USER EXEC commands allow you to connect to remote
devices, perform basic tests and list system information.
requires a user name and password. You have three login attempts before a connection attempt is
refused. USER EXEC commands (available at the user level) are a subset of the commands
available at the privileged level. In general, USER EXEC commands allow you to connect to remote
devices, perform basic tests and list system information.
To list available USER EXEC commands, use ? at the command prompt. The USER EXEC prompt
consists of the device host name followed by an angle bracket (>). The default host name is
generally “WLAN Module”. Use the GLOBAL CONFIG command to change the hostname.
consists of the device host name followed by an angle bracket (>). The default host name is
generally “WLAN Module”. Use the GLOBAL CONFIG command to change the hostname.
User exec commands
summarizes USER EXEC commands:
TABLE 3
User Exec Mode Command Summary
Command
Description
Ref.
Resets the command to the previous configuration
Clears the display screen
Displays the cluster context
Turns off (disables) the privileged mode command set
Turns on (enables) the privileged mode command set
Ends the current mode and moves down to the previous
mode
mode
Describes the interactive help system
Exits the EXEC mode
Negates a command or sets its defaults
Toggles the paging functionality
Sends ICMP echo messages
Exits the current mode and moves to the previous mode
Displays
service
commands
Opens a telnet session